Build sheets and window stickers

[ABFirecracker]

Hi All, I’m new to the ordering process. At what stage do the build sheets and window stickers tend to show up? My order just went into framing and I haven’t seen either yet.

Advertisement

 

[ToolMan514]

Build sheet when in rolls off the line ready for inspection. Window Sticker when it leaves the plant ready for transport.

 

[CohuttaDen]

Build sheet when in rolls off the line ready for inspection. Window Sticker when it leaves the plant ready for transport.

My sticker was available at KZ. status... for me , it went D1 -> Framing -> Paint -> I -> JB -> KZ (window sticker, and now on dealer site showing "in transit").

How long are trucks waiting in KZ for a truck these days? I do not think mine will be taking rail.

 

[BillG]

My sticker was available at KZ. status... for me , it went D1 -> Framing -> Paint -> I -> JB -> KZ (window sticker, and now on dealer site showing "in transit").

How long are trucks waiting in KZ for a truck these days? I do not think mine will be taking rail.

Mine was just short of three weeks to truck 500 miles. A friend of mines took a week. You just can’t tell.

 

[[o!!!!!!!o]]

Hi All, I’m new to the ordering process. At what stage do the build sheets and window stickers tend to show up? My order just went into framing and I haven’t seen either yet.

Found that my VON went VIN once it hit D Status, - "Parts collected and sequenced for production".) Seems to vary according to folks here. This is per the Jeep Live Chat Link, they're great to get information on your status: https://www.jeep.com/webselfservice/jeep/index.html - The Build Sheet showed up the moment it left the production line at "Your Vehicle," "Equipment Listing" same page at left, small link. Also found the Window Sticker within 24 hours of the Build Sheet going live; may have been earlier or at the same time of the Build Sheet advancing. Didn't know this till Ky-Soldier posted his link. Worked great. I'd say I'm fortunate, my salesman provided updates for me from 12K miles other side of the planet, routinely. He was right on at each phase.

 

[Waiting]

Build sheet when in rolls off the line ready for inspection. Window Sticker when it leaves the plant ready for transport.

^^^This. My build sheet was found the day it went into "I" status

 

[JSRider]

My sticker was available at KZ. status... for me , it went D1 -> Framing -> Paint -> I -> JB -> KZ (window sticker, and now on dealer site showing "in transit").

How long are trucks waiting in KZ for a truck these days? I do not think mine will be taking rail.

Where were you able to get those status codes

 

[r-d]

Build sheet when in rolls off the line ready for inspection. Window Sticker when it leaves the plant ready for transport.

I got my window sticker a day after my VIN was generated which was almost 3 weeks before being built. My build sheet was available the day after it was built.

 

[WilhelmSR]

Where were you able to get those status codes

http://www.jeepfan.com/tech/chrysler-jeep-vehicle-order-codes/

 

[BobT]

Hi All, I’m new to the ordering process. At what stage do the build sheets and window stickers tend to show up? My order just went into framing and I haven’t seen either yet.

Build sheet arrives when you're actually built. The window sticker seems to be totally up in the air as to when it shows up. Even to the point of first sight is when you pick up the vehicle.
Unknown as to why

 

[Patches]

I received my vin almost a month ago how do I see where they are on my Jeep

 

[lockman1972]

I received my vin almost a month ago how do I see where they are on my Jeep

https://fcacommunity.force.com/Jeep/s/knowledge you can chat with customer service there usually need vin and von

 

[Talox]

Are people getting the status codes from customer service. so far when i've spoken to them all I've gotten from chat is " your order is in the scheduling phase of the manufacturing process. "

My rubicon ordered was just 8/23 so i'm not expecting much but a little more info wouldn't hurt.

 

[CrimsonGhost]

Are people getting the status codes from customer service. so far when i've spoken to them all I've gotten from chat is " your order is in the scheduling phase of the manufacturing process. "

My rubicon ordered was just 8/23 so i'm not expecting much but a little more info wouldn't hurt.

Jc doesn't have the codes. You can get that from the dealer.

 

[lisalynne]

Are people getting the status codes from customer service. so far when i've spoken to them all I've gotten from chat is " your order is in the scheduling phase of the manufacturing process. "

My rubicon ordered was just 8/23 so i'm not expecting much but a little more info wouldn't hurt.

Be prepared. My experience has been little to no status from anyone. Including my dealership. It's nerve wrecking.