BRIGHT WHITE Wrangler JL Club

[Jammer]

No adventure trips yet but just picked her up from OK4WD.

@TeraFlex ST 1.5 with Falcons
KO2s
@fifteen52 TurbomacHD
@BajaDesigns LP9 and rock lights.

question I had the same setup with my license plate up front as you. The carwash kept bending it and tearing it up. yours looks like it's been benta couple times have you had any problems with that and the car wash bending it ? look what I did to mine it can still be seen from a distance but nothing can tear it up not a bad idea my buddy did it for me at his shop sorry a pretty three-time I don't know how to delete do the photos

shop

Sponsored

 

[jwcardy]

Nothing special to show, just introducing myself to the BRIGHT WHITE club. Our 2018 has only been in our possession for a few hours. It has been a while since I've owned a Wrangler. Its nice to own one with some power and an auto. Currently researching and looking for the right lift.

 

[yell03]

Who made the vinyl on top in the black for you did they cut it when they made it for you ? just wondering how you measure to get the right size around the curves and everything? I've been debating to do that on my hood. I have

the exact same JL you have

Seven Wraps in Southampton PA, they custom made it and installed it.

 

[Jessicon]

What headlights did you go with or Halos what brand to get their colors like that and what light bar is that with a different colors probably rigid I guess. And also what bracket is at holding the light bar who makes it ? Thinking about doing one myself but I'm thinking about doing the single light bar it said of the double lots of people are doing that single to keep it more small and clean I was told like here

All lighting is from Quake, light bracket is from ZROADZ

 

[SubZero_JL]

Need help!!

Okay so I got my headlights working. The DRL come on but when I hit blinker it doesn't come on. When all lights are off the blinker works but with the white light

 

[Jammer]

Seven Wraps in Southampton PA, they custom made it and installed it.

What they charge to make it and what they charge to install it ?

 

[voodoo11]

question I had the same setup with my license plate up front as you. The carwash kept bending it and tearing it up. yours looks like it's been benta couple times have you had any problems with that and the car wash bending it ? look what I did to mine it can still be seen from a distance but nothing can tear it up not a bad idea my buddy did it for me at his shop sorry a pretty three-time I don't know how to delete do the photos

shop

My license plate has been transferred from my JK. It was sitting on a flip up license plate holder, which became a casualty of my teenage daughter not remembering to leave the truck into first while parking and it hit a parking meter pole. Bonus is now she refuses to drive manual so I get the truck all to myself

 

[voodoo11]

question I had the same setup with my license plate up front as you. The carwash kept bending it and tearing it up. yours looks like it's been benta couple times have you had any problems with that and the car wash bending it ? look what I did to mine it can still be seen from a distance but nothing can tear it up not a bad idea my buddy did it for me at his shop sorry a pretty three-time I don't know how to delete do the photos

shop

Did you drill into the skid plate and secure the bottom part of your license plate after bending it?

 

[yell03]

What they charge to make it and what they charge to install it ?

I believe it was $350 total, made and installed.

I give them a lot of business so I am sure it was discounted.

They tinted my Jeep at the same time and a month before they did my Raptor's tint and graphics.

 

[Jammer]

I believe it was $350 total, made and installed.

I give them a lot of business so I am sure it was discounted.

They tinted my Jeep at the same time and a month before they did my Raptor's tint and graphics.

Okay thank you I'm sure the rap places around here will charge me double they're so expensive

 

[yell03]

Okay thank you I'm sure the rap places around here will charge me double they're so expensive

If you like it that much it is worth it.

I am sure it would have been more like $500 if I had not done all the other stuff.

 

[Jammer]

If you like it that much it is worth it.

I am sure it would have been more like $500 if I had not done all the other stuff.

can you PM me or put the phone number on here I'm going to call and see what they would charge to make it up. They have the measurements and know exactly how to cut it and everything and then I could just ship it to me instead of starting from scratch with someone here

 

[yell03]

can you PM me or put the phone number on here I'm going to call and see what they would charge to make it up. They have the measurements and know exactly how to cut it and everything and then I could just ship it to me instead of starting from scratch with someone here

I will PM you

 

[Jammer]

I will PM you

Ok thanks

 

[AggieJeepGuy]

What tires are those ?

Cooper st maxx 37x12.5x17 on method standards. Currently running no lift. Not dissatisfied at all with them but the extra 1.5in width on the new rims flattened the sides out quite a bit so lost some of the “look” they had so contemplating a switch to the stt pros once I get some of the other mods (bumpers, rails, etc) checked off.

Sponsored