nyvisual
Well-Known Member
- First Name
- Tom
- Joined
- Dec 13, 2020
- Threads
- 17
- Messages
- 123
- Reaction score
- 177
- Location
- Fort Mill, SC
- Vehicle(s)
- 21 JLU Rubicon
- Thread starter
- #1
I’ll preface by saying I have zero electrical hardwiring experience. I feel confident I can do this mod:
I have a question about wiring the dashcam into the always on battery cable that comes with the AUX package.
I obviously know the black wire is the ground.
Yellow = Battery Red = Acc
What’s the next step of wiring for the two remaining wires? My assumption was that the yellow would be crimped and connected to the battery wire in aux package. This still leave the Acc wire?
I know...I know...this guy is asking elementary questions. But a little guidance will go a long way here.
I have a question about wiring the dashcam into the always on battery cable that comes with the AUX package.
I obviously know the black wire is the ground.
Yellow = Battery Red = Acc
What’s the next step of wiring for the two remaining wires? My assumption was that the yellow would be crimped and connected to the battery wire in aux package. This still leave the Acc wire?
I know...I know...this guy is asking elementary questions. But a little guidance will go a long way here.
Sponsored