Best way to remove “unlimited” badge

[Mikeyut3]

Want to remove “wrangler unlimited” badge from both sides. Whats the “best” way? And then after removal whats the “best” way to clean any residue and make sure its “all” gone and wont effect paint?

Thanks!

P.s. I dont have a heat gun laying around.

Sponsored

 

[ThirtyOne]

If you don’t have a heat gun you can use a hair dryer. Or even just park in the sun on a hot day.

 

[GtX]

I just peeled them off in the garage. No heat. Picked at them with my fingernail until they lifted.

 

[Rico1111]

Like using floss....use a fishing line between fingers of both hands and start at one end and go thru back side of badge! Then use a citric cleaner like orange goo gone but make sure to use an alcohol after to remove any residue of citric, then a wax to cover and protect.

 

[Mikeyut3]

use an alcohol after to remove any residue

To remove thr goo gone? Just any rubbing alcohol?

 

[Rico1111]

Yes it will be fine but you have to then apply a good wax to the area !

 

[Shaved Ice]

I just peeled them off in the garage. No heat. Picked at them with my fingernail until they lifted.

This is what I did, easy and no residue.

 

[Ingrum]

I let mine sit in the hot sun for a few hours and they came right off. No residue.

 

[Black Jeep Convertible]

Anyone remove the Jeep emblems from both sides?

 

[chevymitchell]

Anyone remove the Jeep emblems from both sides?

It's the same process as listed above. Let it sit in the sun or use a little heat.

I've had success just peeling them off using a plastic scraper. Heat is always best for the actual badges. The stickers use a completely different adhesive and can usually just peel off with your fingernail.

 

[Black Jeep Convertible]

I used turtle wax adhesive remover at the end to get the rest off. I have no heat gun or garage so I did this when it was 30-40F outside.

Sponsored