Bare bones sport 2dr JL (not even AC)

[JLWranglerJL]

You installed the headlamp switch with the auto function?

Sponsored

 

[Gina]

You installed the headlamp switch with the auto function?

Yes, it has the auto function. I have switched the knob to auto, so the lights are always on. The lights turn off after I get out of the car.

 

[wranglerflx]

Yes, it has the auto function. I have switched the knob to auto, so the lights are always on. The lights turn off after I get out of the car.

can you post a pic of the headlamp ? did they have to add the wires ?
ps dont you have one (a headlamp) already on the bar above your head ?

 

[wranglerflx]

Update? You get it? What do you think?

I love it i don't care about AC at all
made the correct decision
even today its almost April -33F in the morning

 

[Gina]

can you post a pic of the headlamp ? did they have to add the wires ?
ps dont you have one (a headlamp) already on the bar above your head ?

Sorry if I am not being clear. Another Jeep owner did it as well. This is what I am referring to:
https://www.jlwranglerforums.com/forum/threads/2018-jl-headlight-switch.39313/

 

[wranglerflx]

Molar headlamp Switch installed plus keyless entry (driver, passsenger and rear gate) for $699 plus tax.

Could you share some pics of your remotes and the lock/unlock inside & gate switches ?
Do you have to carry two bulky key attachments ? (the original jeeps and the new remote)
Also how much were just the locks if you can figure this out ? ( no gps and no headlamp )

 

[Gina]

Could you share some pics of your remotes and the lock/unlock inside & gate switches ?
Do you have to carry two bulky key attachments ? (the original jeeps and the new remote)
Also how much were just the locks if you can figure this out ? ( no gps and no headlamp )

The actual switches are on back order and those are going to be installed within the next couple of weeks (keyless entry works with the remote only right now). I have to carry the giant Jeep fob (because I have push start), as well as the keyless entry fob (which is significantly smaller). If I took out the switch replacement, I would say it was approximately $600 for the locks and kelyless entry.

 

[wranglerflx]

Sorry if I am not being clear. Another Jeep owner did it as well. This is what I am referring to:
https://www.jlwranglerforums.com/forum/threads/2018-jl-headlight-switch.39313/

got it now thanks

 

[wranglerflx]

The actual switches are on back order and those are going to be installed within the next couple of weeks (keyless entry works with the remote only right now). I have to carry the giant Jeep fob (because I have push start), as well as the keyless entry fob (which is significantly smaller). If I took out the switch replacement, I would say it was approximately $600 for the locks and kelyless entry.

did you get the inside switches installed ? can you post some pics ?
I am also looking for the parts (left right rear locks wires/mopar kit numbers etc.) if you happen to have them available of course
there is a guide for the 4 door installation I wonder if it matches the 2 door (just front doors and gate obviously)

 

[Gina]

did you get the inside switches installed ? can you post some pics ?
I am also looking for the parts (left right rear locks wires/mopar kit numbers etc.) if you happen to have them available of course
there is a guide for the 4 door installation I wonder if it matches the 2 door (just front doors and gate obviously)

Yes, the person i hired to install everything is going to install the inside locks but they are on back order due to COVID-19. I can ask him what parts he used but I believe he went directly through Mopar.

 

[Gina]

Yes, the person i hired to install everything is going to install the inside locks but they are on back order due to COVID-19. I can ask him what parts he used but I believe he went directly through Mopar.

Initially he was not going to put inside locks in and said I can use the remote, but I told him I really wanted the inside locks.

 

[Gina]

did you get the inside switches installed ? can you post some pics ?
I am also looking for the parts (left right rear locks wires/mopar kit numbers etc.) if you happen to have them available of course
there is a guide for the 4 door installation I wonder if it matches the 2 door (just front doors and gate obviously)

After months of being on back order, the inside switches were finally installed. This was the only area they could really put them since I have manual windows.

 

[wranglerflx]

they look cool thanks for the pics
on the tail gate: any idea if they had to install anything ?
(like wires and/or the locking actuator ?)
some folks on other forums suggest that the locking actuator is already there
and all you need to do is to ... wire it.
also if you have a parts list handy ... it will be greatly appreciated

 

[Gina]

they look cool thanks for the pics
on the tail gate: any idea if they had to install anything ?
(like wires and/or the locking actuator ?)
some folks on other forums suggest that the locking actuator is already there
and all you need to do is to ... wire it.
also if you have a parts list handy ... it will be greatly appreciated

I have the sport, but I can confirm there were no actuators. He had to install both the actuator and the wires.

 

[wranglerflx]

I have the sport, but I can confirm there were no actuators. He had to install both the actuator and the wires.

so no actuator in the tail for the bare sport wrangler ~thanks

Sponsored