My jl Tazer says 1 full second off on the 0-60 on my 21 rubicon 1tons and 40sI was considering buying the full banks kit. 2 gauges, the derringer and pedal monster. Still waiting to here overall feed back on performance boost.
I donāt think this will reduce regens since itās just tricking the computer into giving more fuel and air. You would probably need to full tune for that. However the derringer has the advantage of being invisible to dealer once removed. I donāt think the flash tunes are, even if you flash it back to stock I think they can tells itās been modified.
The 2020-2021 derringer is now listed as available on the banks page .Do you have a contact at banks? I have called multiple times and multiple people told me not available yet.
Acceleration won't be linear, and they'll have different slopes and potentially nonparallel torque curves. Not to mention the top speed will be different in the quarter, so 1 sec and 4 truck lengths seem to be in the realm of possibilities.The website says that 0-60 is improved by 1 second and the tuned Jeep will "get over 4 truck lengths ahead of stock in the 1/4 mile". Assuming a 90mph trap speed, 4 truck lengths is just shy of .5 seconds. Those two claims seem to be inconsistent with each other. For you numbers guys, did I make a math error?
Ha! I sent the email to my wife since itās really her Jeep and she replied with āaww hell, why not!āGot the email today. Wife said hell no She said, sounds like something we don't need.
I said, well we didn't NEED the diesel either....
There was no response
Ha! I sent the email to my wife since itās really her Jeep and she replied with āaww hell, why not!ā
They are definitely shipping ASAPI ordered my Derringer with DataMonster gauge today. The guy I spoke to said they're still waiting for approval (as the website indicates), but I'm at least in queue to ship once they get the clearance. I'm excited to see the gains and am happy they've put the proper protections in place to protect the 8HP75. It's rated for 750 N.M. (553 ft. lbs), so the 460 ft. lbs they're showing at the wheels still leaves some headroom as it leaves 20% for drivetrain loss.
I would also assume a modern drivetrain is more efficient than the age old saying of 20%. In that case, it wouldn't be right at the rated limit.
GSLSE21B, you're very lucky to receive a system ahead of the launch!
EDIT: Received my shipping notification! I'll keep the group updated with results, and will post a video of the acceleration difference compared to stock. I'll also see about doing a comparison while towing.
Derringer Tuner for 2020-21 3.0L EcoDiesel Adds 57 hp, 73 lb-ft to RAM, JEEP JL, Gladiator Shave a full second off your 0-60 time and get over 4 truck lengths ahead of a stock EcoDiesel in the 1/4 mile! Derringer makes getting onto the highway and merging effortless. And, towing is even easier now with its added 57 hp and 73 lb-ft of torque. And, with Derringer's patented ActiveSafetyĀ® features you can rest assured your RAM or JEEP's engine and transmission are protected. No other inline tuner offers the power and peace of mind that you'll get with Banks' Derringer. Derringer for the 2020-21 EcoDiesel-powered RAM, Jeep JL, or Jeep Gladiator is available in three configurations. All kits in stock! Order here Derringer with iDash DataMonster [Part # 66797] Order here Derringer with iDash SuperGauge [Part # 66798] Order here Derringer for use with existing iDash [Part # 66799] What is Derringer? Watch this video. |
From: https://official.bankspower.com/faq-derringer-and-idash/So this is 100% guaranteed untraceable when unplugged if the motor goes poopoo?
After removal its presence is undetectable.
It does not unlock your PCM so how will they detect anything? Not really possible unless you forget it hooked up inside the cabSo this is 100% guaranteed untraceable when unplugged if the motor goes poopoo?