wbee
Well-Known Member
- First Name
- Wade
- Joined
- Feb 1, 2018
- Threads
- 2
- Messages
- 135
- Reaction score
- 183
- Location
- Spring, TX
- Vehicle(s)
- 2010 JKU, 2018 JLUR
I followed the schematics and built my wiring harness and tested it prior to plugging it into the lights and it works perfectly. Low beams on aux1 and high beam on Aux 2. If I happen to have both switched on it defaults to high beam. It was straight forward and only took me a couple hours from start to finish.
Sponsored