BluRubicon
Active Member
- First Name
- Mark
- Joined
- Dec 17, 2017
- Threads
- 5
- Messages
- 35
- Reaction score
- 28
- Location
- Bradenton Fl
- Vehicle(s)
- 2018 Jeep JL Rubicon Ocean Blue ord’d 5/21, Enclave, Harley Ultra Glide
- Vehicle Showcase
- 1
- Thread starter
- #1
I've loss all power to the Aux Switch Panel. All switches 1-4 = no power.
I've pulled and looked at F72, F92, F93. I've pulled and re-plugged in K17 & K 18.
I still get nothing.
So I looked at Post N4 and there's no bolt and no wire? Did my Wire drop? It's a different look than the other post. Can someone look at your N4 and let me know what you see? My pic is attached. I'm just wondering before I start climbing underneath with a new knee.
FYI - I had a shop install Well Lights AUX 2 and the glow of Baja Design 6's set to Aux 1. I have lost power previously to these and regained power for unknown reasons.
I've pulled and looked at F72, F92, F93. I've pulled and re-plugged in K17 & K 18.
I still get nothing.
So I looked at Post N4 and there's no bolt and no wire? Did my Wire drop? It's a different look than the other post. Can someone look at your N4 and let me know what you see? My pic is attached. I'm just wondering before I start climbing underneath with a new knee.
FYI - I had a shop install Well Lights AUX 2 and the glow of Baja Design 6's set to Aux 1. I have lost power previously to these and regained power for unknown reasons.
Sponsored