JMatt
Well-Known Member
- Thread starter
- #1
I've been searching here and googling and still can't figure this out. My JLUR has been basically in storage for 6 months. Just got home, hooked the batteries back up, and now I have two issues:
1) auto climate control only has two temperature positions "Hi" and "Lo." If you try to move the sliders to any temp, it just pops right to "Hi" or "Lo" again.
2) Maybe related, but the u-connect screen will only show driver seat heat, but not passenger. But I can hit the physical button and the heated passenger seat does work.
What I've tried so far: checked fuses, made sure all fuses were firmly installed, factory reset, took off hvac control panel and physically unplugged, then plugged back in.
Nothing changes. "Hi" or "Lo" only. What known issue have I missed?
1) auto climate control only has two temperature positions "Hi" and "Lo." If you try to move the sliders to any temp, it just pops right to "Hi" or "Lo" again.
2) Maybe related, but the u-connect screen will only show driver seat heat, but not passenger. But I can hit the physical button and the heated passenger seat does work.
What I've tried so far: checked fuses, made sure all fuses were firmly installed, factory reset, took off hvac control panel and physically unplugged, then plugged back in.
Nothing changes. "Hi" or "Lo" only. What known issue have I missed?
Sponsored