- Joined
- Aug 21, 2017
- Threads
- 60
- Messages
- 232
- Reaction score
- 474
- Location
- North Salt Lake, Utah
- Website
- www.Artecindustries.com
- Vehicle(s)
- 2014 JKU, 2020 JLUR 2019 JTR 2021 JTRD
- Thread starter
- #1
392 Owners You seen it here first ! Here is a Teaser of the V2 Belly pan that I am leaking These variants will start shipping in a few weeks.
Some of the key factory that differentiate this from the V1 are :
1 . More clearance around the exhaust crossover pipe between it and the pan
2. No more opening for the oil drain plug it will have a braced access door for oil drain plug
3. More ground clearance for oil pan skid
4. Opened up tolerance for better panel fitment for vehicle manufacturer varances.
5. Re worked muffler skid mounts and tip guards for easier install and more clearance around tips
6. New rear crossmember for Mid muffler skid (future offering no pricing yet eta 2nd quater shown in 2nd pic)
Some of the key factory that differentiate this from the V1 are :
1 . More clearance around the exhaust crossover pipe between it and the pan
2. No more opening for the oil drain plug it will have a braced access door for oil drain plug
3. More ground clearance for oil pan skid
4. Opened up tolerance for better panel fitment for vehicle manufacturer varances.
5. Re worked muffler skid mounts and tip guards for easier install and more clearance around tips
6. New rear crossmember for Mid muffler skid (future offering no pricing yet eta 2nd quater shown in 2nd pic)
Sponsored