So true - thanksI've been searching as well, but no luck so far. Apparently there are 3 different mounting brackets for the fog lights depending on if you have a Sport, Sahara/Rubicon or a steel bumper. Ridiculous. Someone at some point has to make a bracket to fit halogen lights onto LED bumpers but I have yet to find one. At this point the $800 for the factory LED upgrade was looking like a good idea. But hindsight is 20/20.
Is the plastic piece between the bumper and grille still there?Here is my set up for auxiliary lights with plastic bumper
It looks like the mount he used bolted directly to the frame using existing holes and hardware. Don't think he drilled into bumper looking at the pics he provided, only some minor trimming of plastic for vertical part of mount.There is a similar thread on this forum (somewhere). I drilled through the plastic and into the metal part of the bumper. Then via the use of longer fully threaded bolts, 3 nuts and 3 washers I was able to clamp the brackets to the plastic but actually support from the metal bumper by clamping to it with nuts both top and bottom.