Anybody running Ultimate Dana 60's yet?

[Lorenc]

I'm not helping unless you post pics.

Here’s all the pics I have so far...
https://www.jlwranglerforums.com/forum/threads/jl-jack-big-tall-build.27499/
Joe at Zautomotive released an update yesterday that fixes this and enables you to still see the transfer case selection on the instrument cluster. I’ll try this and then post the details of the fix here...
Loren

Sponsored

 

[DOOKEY]

Here’s all the pics I have so far...
https://www.jlwranglerforums.com/forum/threads/jl-jack-big-tall-build.27499/
Joe at Zautomotive released an update yesterday that fixes this and enables you to still see the transfer case selection on the instrument cluster. I’ll try this and then post the details of the fix here...
Loren

Glad I could help.


I'm running the TazerJL BTW.

 

[Jeep4me]

Just curios if you ever figured out away to wire into the factory locker switches?

 

[Lorenc]

Just curios if you ever figured out away to wire into the factory locker switches?

No, I haven’t seen anybody that has a way to do that...

 

[DOOKEY]

Just curios if you ever figured out away to wire into the factory locker switches?

I haven't looked into it. Struggling with motivation. I hard wired my lockers to the factory accessory switches so they work. I'm selling my stock axles and so far everyone has asked if they can have the stock locker switches with them. So I may yank them out and put the stock hole in there.

 

[Lorenc]

I haven't looked into it. Struggling with motivation. I hard wired my lockers to the factory accessory switches so they work. I'm selling my stock axles and so far everyone has asked if they can have the stock locker switches with them. So I may yank them out and put the stock hole in there.

I also used the accessory switches. The accessory switch shows that the locker should be engaged, but there is not a light to show it is locked, I hope that may come back.
Btw, I sold my lockers with tie rod and track bar for $4200
So is there a factory plug? Do you have a part no?

Loren

 

[RenoMD]

I also used the accessory switches. The accessory switch shows that the locker should be engaged, but there is not a light to show it is locked, I hope that may come back.
Btw, I sold my lockers with tie rod and track bar for $4200
So is there a factory plug? Do you have a part no?

Loren

Did you ever get this figured out in regards to using the factory locker switches? The way the ultimate Dana video says it directly works with their accessory harness however i have yet to confirm with anyone whom actually installed this. Thank you

 

[Lorenc]

Did you ever get this figured out in regards to using the factory locker switches? The way the ultimate Dana video says it directly works with their accessory harness however i have yet to confirm with anyone whom actually installed this. Thank you

No option to use factory locker switches as it’s a 4 wire system versus only 2 wire on Dana 60. Plus I’m happy with being able to select lockers as I want. Ie front only.

Loren

 

[Pbjeep]

What is the width of ultimate 60? I see that dynatrac is 68 or 72” but what is the width of the ud60. Thanks

 

[Lorenc]

What is the width of ultimate 60? I see that dynatrac is 68 or 72” but what is the width of the ud60. Thanks

I'm pretty sure it was 72.5". I used 8.5" wheels with 4.5" backspace, my overall width from tire outer to tire outer is 86"

Loren

 

[Pbjeep]

Donkeys looks wider. Maybe y’all could measure brake rotor to brak rotor and see the difference. I’m curious what the width of the ud60 is and can’t find it on the web. I assume the ud44 is the same width as 60 which would be close to stock rubicon width, but I’m just guessing.

 

[DOOKEY]

I believe the UD60's are 68.5" wide to match the stock width. My Dynatrac axles are 72.5" wide. I'm running a 10" wide wheel with 4.5" back spacing.

And it's Dookey. LOL

 

[19JL]

What is the width of ultimate 60? I see that dynatrac is 68 or 72” but what is the width of the ud60. Thanks

68.5”

 

[Pbjeep]

I believe the UD60's are 68.5" wide to match the stock width. My Dynatrac axles are 72.5" wide. I'm running a 10" wide wheel with 4.5" back spacing.

And it's Dookey. LOL

Thanks. Damn autocorrect.

 

[twisty]

Curious if anyone knows the weight of the 60s?

Sponsored