lohr500
Well-Known Member
Scratching my head a bit with his explanation. Surely the outer nut is just a locking nut to stop the inner hex adjuster coming loose? So the play would be taken up by winding in the hex adjuster and then the locking hut would be retightened. Unless I am missing something, shouldn't the locking nut end up in the same position if it is retightened to the same torque as was used previously?
I suspect he has been a bit heavy handed with the 1/2 inch drive and 15mm socket.
I suspect he has been a bit heavy handed with the 1/2 inch drive and 15mm socket.
Sponsored