Any suggestion for a good foot peg when doorless?

[Packnbeer]

Does anyone have any recommendations for foot pegs when running doorless? I set my foot on my running board currently and want a foot peg. I am not a fan of bolting to the hinge because I don't want to chip the hinge paint. Also, what keeps it from turning? I have also seen some that rest against the paint (with a pad) but not thrilled about that idea. I use Coyote mirrors when doorless so I don't have to mess with tightening to a hinge. Are there any that are tool less? Looking for a 21 JL

Sponsored

 

[Packnbeer]

found the perfect solution on Ebay. These foot pegs use the hinge but only a pin and then bolt on with the door catch bolt. There is no risk of paint damage with these and you dont arent tightening a nut and bolt into the hinge.

 

[PntBlnk]

found the perfect solution on Ebay. These foot pegs use the hinge but only a pin and then bolt on with the door catch bolt. There is no risk of paint damage with these and you dont arent tightening a nut and bolt into the hinge.

Link?

 

[Packnbeer]

Link?

sorry...

Foot Rest foot pegs fits Jeep JL Wrangler JT Gladiator 18 19 20 21 (6-slot) | eBay

 

[zw470]

I use these. I don't ever bother tightening the nut the whole way, just finger-tight to keep the peg from falling out.

https://www.amazon.com/dp/B08C4Q643W/ref=cm_sw_r_api_i_MS6KPFQN037FGVRMPFMY_0?_encoding=UTF8&psc=1

Fixed the link, I hope.

 

[Dyolfknip74]

I use these. I don't ever bother tightening the nut the whole way, just finger-tight to keep the peg from falling out.

JeCar Foot Pegs Rests Pedal Foot... https://www.amazon.com/dp/B08C4Q643W?ref=ppx_pop_mob_ap_share

Your link is broken.

Use this

 

[zw470]

Your link is broken.

Use this

Your link works but it doesn't go to the pegs I bought

https://www.amazon.com/dp/B08C4Q643W/ref=cm_sw_r_api_i_MS6KPFQN037FGVRMPFMY_0?_encoding=UTF8&psc=1

 

[Dyolfknip74]

Your link works but it doesn't go to the pegs I bought

https://www.amazon.com/dp/B08C4Q643W/ref=cm_sw_r_api_i_MS6KPFQN037FGVRMPFMY_0?_encoding=UTF8&psc=1

Lol, I was winging it as I couldn't open your original link.......we are basically a self licking ice cream cone now though.

 

[Packnbeer]

Lol, I was winging it as I couldn't open your original link.......we are basically a self licking ice cream cone now though.

Those were my second choice. Those look good. On the ones I got from ebay, I ended up sanding them down and refinishing them with truck bed liner. They look better now

 

[Bndrpa1]

I used these and printed on my 3d printer. Work great no paint issues at all and choose color.

https://www.thingiverse.com/thing:5155908

 

[DaltonGang]

I don't get it. What is the big fascination with "Foot Pegs" and sticking your feet out of your Jeeps??

.

 

[thecritter]

I don't get it. What is the big fascination with "Foot Pegs" and sticking your feet out of your Jeeps??

.

Lol its fun!! Have you tried it?

 

[DaltonGang]

Lol its fun!! Have you tried it?

Nope. I would have to take my doors off. Too darn hot in Houston.

 

[Canes_JL]

found the perfect solution on Ebay. These foot pegs use the hinge but only a pin and then bolt on with the door catch bolt. There is no risk of paint damage with these and you dont arent tightening a nut and bolt into the hinge.

That’s what we use. They work great.

 

[Packnbeer]

I used these and printed on my 3d printer. Work great no paint issues at all and choose color.

https://www.thingiverse.com/thing:5155908

those are completely bad ass!!!!

Sponsored