aftermarket switches

[MyDaughters20JL]

daughter decided against installing the OEM aux switches, so looking for ideas: a friend has a '17 JK with the rough country switch bank mounted above the windshield which is extremely nice. The problem is that for her '21, the switches are either the small button type rocker switches that are mounted in the dash or the 1x2 rocker switches that mount on the dash...My daugher is only 5'4" and even the slight amount of extra height from the switches I KNOW is going to be in the way of her vision. looks like, barring an above windshield mount, might have to go with the A-Pillar mount switches...anyone familiar with all the options as far as something similar to the RC unit with respect to the under hood wiring but with a-pillar switches? any other ideas that I might run by my daughter?

Sponsored

 

[JLTruman]

I like my rough country mlc-6 dash mount for the ease of use, however, the one I purchased was on sale around Christmas last year. The hardware was not correct. I had to modify(or use some I already had laying around) some of the nuts and bolts to install on the dash and the power cables under the hood. Once the install was complete which took way longer than it should have it worked out. I have seen other posts about the lower switch bank being easier to install but I dont know personally. I have some pod lights, small light bar, back up lights, and some rear interior lights and they all work great.

 

[James_a]

I'm in the process of installing the Switch-Pro 9100. It's a nice self contained unit with an a-pillar controller.

https://store.switchpros.com/sp-9100-switch-panel-power-system/

With the JL mounting kit.
https://store.switchpros.com/jeep-jl-jt-mounting-kit/

Has a nice low profile and the power module doesn't take up much space in the engine bay and can be mounted by the battery or on the firewall.

 

[Cliebo]

Roughy country mlc-6 switch bank, love it!

 

[Msilvs777]

I did the mlc-6 from Rough Country with the lower dash kit and it could not be easier to install! Hardest part was fishing the cable loom through the center dash because my hands are a little fat. Otherwise it goes in easy, looks great and makes adding 12v accessories a breeze!

Sponsored