Aftermarket Rims / Wheels

[isueyou]

Anyone know what company makes the deep/satin red wheels with a bit of chrome around it?

Searched 23 pages this morning on my phone hoping someone had them.

Sponsored

 

[coukos34]

Wanted to share my experience with the new Quadratec 41 wheel. I chose due to being hub centric wheel and having a rare +10 offset (don’t want tires sticking out too much due to local laws).

Wrapped them in 315/70r17 BFG KO2 (C rated) tires, and couldn’t be happier with how it looks and performs. Drives slightly heavier than stock but hardly noticeable. Plenty of pep with the turbo, and haven’t seen much difference in mpg yet.

Really happy with my choices and how things worked out.

 

[Kmstivers]

For those of you with 33” tires and 20”
Rims, what price range should I expect?

Torn between 33” and 35” - not sure if I want to spend the extra thousands on 2” lift.

 

[Dormamu]

KMC XD Holeshot
Mastercraft Courser MXT 315/70r/17

 

[Waiting]

Mopar simulated bead locks, 315 KO2s, no lift. Fits on carrier without raising third brake light, rubs on steel bumper, and sets parking sensor ape shit. The 8 inch wide wheel, in non-bead lock mode, adds a good amount of meat to the tire without looking as silly as stock width wheels (imho). The rings come painted in silver that really looks like the old Bright Silver.

 

[One_adam12]

Question for the group,

Would a 20x11.5 et -44 be too wide of a wheel? And would a 35/12.5/R20 nitto trail grappler be alright to mount, it says acceptable wheel width is 9-11 but would the .5 be pushing the limit?

Or would i just be better off sticking with a 20x9.5 et -24 ??

Thanks in advance

 

[mjf4241]

Nitto Ridge Grappler 37x13.5r17
SCS K5 with -10 offset/4.3” backspace
No lift yet (no rubbing on road)

I really like that look. I have a Mojito Rubicon and want to do this setup. I'm wondering how the added weight has affected the overall manners of your jeep (acceleration, braking, transmission searching for gears).

 

[rjrubi]

Just installed Black Rhino Armory on sock KOs. I like them. Only issue is on spare tire back up camera cover lock no longer fits. Still good field of vision but can see the bottom of the wheel.

 

[Karl_in_Chicago]

Anyone running 22s with 37” wheels? No offense to the “true off-roaders”.

Gonna have to REALLY stretch that rubber to get 'em to fit!

 

[Mvp8500]

I went with 35" BFG KO2's on 17"x9" Trailmaster TM220 rims. I love them.

 

[JaxJeep]

Hey Guys - does anyone have feedback on Raceline wheels? I’m considering something like this for my Sting Gray...something a little different.

 

[NewBlueJLU]

Mopar simulated bead locks, 315 KO2s, no lift. Fits on carrier without raising third brake light, rubs on steel bumper, and sets parking sensor ape shit. The 8 inch wide wheel, in non-bead lock mode, adds a good amount of meat to the tire without looking as silly as stock width wheels (imho). The rings come painted in silver that really looks like the old Bright Silver.

Where’d you get these and what’d they run? Also do they come with black lugs?

 

[NewBlueJLU]

Mopar Beadlocks with powder coated rings. Trying to decide if I like them or not....

Where’d you pick these up? What’d they cost you?

 

[Filliat]

does anyone have any 285 or 295 wide tires on a 4.3" backspace? Found a great deal on some, it's a good bit less backspacing than i would prefer but i've only seen 12.5 or 13.5 witht this offset.

Has anyone found a way to extend the camera housing to get a better view with the deeper dish wheels?

 

[millerjl]

I am looking to get the XD holeshots too but keeping my stock KO2's. They make a 17x8.5 with a +34 offset. Which should put it right the same as stock as far as sticking out from under the fender.

KMC XD Holeshot
Mastercraft Courser MXT 315/70r/17

Sponsored