Aftermarket Rims / Wheels

[Terpsmandan]

thanks.

doubt they will pass my local laws as wheels can’t stick out from the fender. Perhaps if I get the fender extensions……

Get a set of XR fender extensions:

https://www.moparoriginalparts.com/...rARpFDjAGHw63bReFurvwYtoakDoMZYBoCNpkQAvD_BwE

I have them on hers and mine running 12.5" tires and it just covers the tire.

Sponsored

 

[Terpsmandan]

@aldo98229 do you have one of these?

https://www.quadratec.com/products/55010_1026.htm

 

[aldo98229]

@aldo98229 do you have one of these?

https://www.quadratec.com/products/55010_1026.htm

Nice!

No. But I’ve been thinking of getting one of these —see below.

Problem is they want $55 for ONE!

 

[Terpsmandan]

At least it's available. I swapped a 231 box into a ZJ to replace the 249 that had a locked up coupler and paid through the nose for the t-case bezel. Not sure if i have room now but I would need this one and it's only $35

 

[Terpsmandan]

And maybe this

 

[roobies]

These are what I am considering. I think they will work well on a black Rubicon.

 

[Discount Tire]

The Fuel Reaction is a good looking wheel. What size are you thinking?

 

[JoeJrTheBarber]

Anyone on here running NOMAD wheels ? Looks like they are owned by parent company RaceLine Wheels. I dig the Nomad Convoy as its kinda modern spin on the classic hole design..

I was thinking of having these powdercoated Silver Zynith to match the exterior of my 2023 Rubicon --->

So setup would be A Mopar lift, 37" Cooper Discoverer STT pros on the Nomad 17x9.5" wheels.

Thoughts ?

 

[dragoneggs]

These are what I am considering. I think they will work well on a black Rubicon.

Awesome looking but it does have more than a hint of mall crawler.

 

[roobies]

Awesome looking but it does have more than a hint of mall crawler.

yeah I see that too

 

[1ncChief]

35x12.5R17 BFG KO2 on Black Rhino Chamber 17x8.5 0 offset

stock rubicon no lift

Really like these wheels on your Rubicon, looks great. I dig a lot of Black Rhino designs and these are one of my favorites, nice choice!

 

[Bill_P]

These are what I am considering. I think they will work well on a black Rubicon.

These are cool rims, but just like the Fuel Assaults that came on my '18 when I bought it, the way the spokes are right at the edge of the rim makes them a great target for any rock that is taller than the sidewall of your tire. I have a rim that is a bit rashed from that.

 

[AC87]

Can anybody tell me what rims are those and if by any chance you also know the color code for this AEV custom paint?
Thanks

If AEV ever do release this rim, I will more than likely buy it. It's so cool. It's different. I hope they do!

 

[HDSlowride]

17x8.5, -6mm Icon Reboud Titanium Wheels and BFG KO2 315/70/17 tires.

I have decided to replace my oem Falken Wildpeaks with this same tire, the BFG 315/70R17. So now to decide on a wheel, factory on my 2021 Rubicon or aftermarket. I really like the looks of a the Method 305, 17 X 8.5 which has "0" offset.
So if my calculations are close, the Method wheel would move the centerline of the tire outboard by 1.75", since the factory wheels have a 44mm offset. (I believe that is correct). So given the wider BFG at (315) or 12.4", compared to the oem tires (11.22" wide), the inside edge of the BFG tire would still be a full inch further outboard from the control arms and such compared to the factory setup. Is that correct? And your wheels with a -6 offset would move them another 1/4" even futher out. Correct?
It seems to me that if you wanted to keep the BFG 315 in the same relative position regarding the inside of the tire to the control arms and such, you would need to look for a wheel with about a 25mm offset as opposed to the factory wheel which has the 44mm offset. Unless you just wanted more poke out. Is my thinking correct about these numbers. Changing tire width, diameter, and wheel offset can sometimes get confusing regarding just where you want the new set up placement.

 

[mantronics]

Vision Rocker is 20x10 on Nitto 35’s . 3 inch zone lift.

Sponsored