Aftermarket Rims / Wheels

[1fastss]

17x9 Fuel Vectors with some 35" Nitto Ridge Grapplers

What offset are the wheels? I only saw -12mm in 17's.

Sponsored

 

[1fastss]

Went with the Fuel Vector's with 35" KO2's. Pretty happy with the entire set up.

 

[Discount Tire]

Went with the Fuel Vector's with 35" KO2's. Pretty happy with the entire set up.

Looks great! Thank you again for your support.

 

[FLUndertaker]

Looking for a more solid versus spoked looking wheel. So far the only thing I’m seeing are the black rhino armory, Arsenal, etc. doesn’t have to be totally solid but minimal spokes, slots or holes preferred. anyone else make a more solid looking wheel besides Black Rhino?

 

[moodywizard]

Just purchased and waiting for the wheels to come in, hope they clear at full stuff 3.5 lift

38x12.5x17 Nitto Ridge grapplers with Method 703 in 0mm/4.75BS offset.

Should I look into a 4.5BS wheel before the wheels arrive? Anyone running that tire/wheel offset combo?

 

[GrayWolf.Overland]

Black Rhino Warlord 17x8 +30 Offset
285/70/17 General Grabber AT/X,
Stock Sahara suspension - no lift.

 

[GunnarJeep44]

Just outfitted 17” Black Rhino Overlands wrapped in 35” Nitto’s. Super happy with the look.

 

[NCPolock]

Looking for a more solid versus spoked looking wheel. So far the only thing I’m seeing are the black rhino armory, Arsenal, etc. doesn’t have to be totally solid but minimal spokes, slots or holes preferred. anyone else make a more solid looking wheel besides Black Rhino?

Take a look at the Fifteen52 Analog wheels if you're looking for the new-school steelies

 

[qnsnocibur]

Just outfitted 17” Black Rhino Overlands wrapped in 35” Nitto’s. Super happy with the look.

Nice!! Does that combo fit on your stock spare carrier, or need to modify?

 

[GunnarJeep44]

Nice!! Does that combo fit on your stock spare carrier, or need to modify?

Thanks! I used a TeraFlex mount kit but I don’t think it would have been necessary I just wanted to be on the safe side with the added weight.

 

[SilverSurfer]

I searched the forum extensively but cannot find any details about full flex.

I need some advice for a set of wheels I am interested in. But, my main concern is rubbing and/or touching the fenders at full flex.

I have a right hand drive 2020 JL Rubicon 2-door. We do not have the, wider Dana axles, high fenders and higher suspension on our right hand drive Rubicons.

I am looking at getting the Dirty Life Roadkill A9302 beadlock wheels, the specs are:

Wheels - Dirty Life A9302 17X9 with a -14 offset
Tires - 285/70R17 Radar Renegade RT+

Note: I do have a Teraflex 1.5” spacer lift already installed and extended the bump stops by 1”.

I looked at all the online tools to see how much further the -14 offset will be but as mentioned I am more concerned with rubbing at full flex as I off road frequently.

I will highly appreciate advice and/or pics of Jeeps with the same off set and tyres at full flex.

 

[SilverSurfer]

I searched the forum extensively but cannot find any details about full flex.

I need some advice for a set of wheels I am interested in. But, my main concern is rubbing and/or touching the fenders at full flex.

I have a right hand drive 2020 JL Rubicon 2-door. We do not have the, wider Dana axles, high fenders and higher suspension on our right hand drive Rubicons.

I am looking at getting the Dirty Life Roadkill A9302 beadlock wheels, the specs are:

Wheels - Dirty Life A9302 17X9 with a -14 offset
Tires - 285/70R17 Radar Renegade RT+

Note: I do have a Teraflex 1.5” spacer lift already installed and extended the bump stops by 1”.

I looked at all the online tools to see how much further the -14 offset will be but as mentioned I am more concerned with rubbing at full flex as I off road frequently.

I will highly appreciate advice and/or pics of Jeeps with the same off set and tyres at full flex.

Just bumping this thread…

 

[longfiredragon]

Right now I am happy with my Rubicon wheels, but I have looked at new ones. The worst thing about wheels is there is so many, (You could look forever)and that wheels for me make or break your vehicle, jeep or otherwise, so you have to be very particular in MHO.

Now that I own a jeep, one thing I noticed is that for some reason designers seem to think everybody wants all those fake rivets around the wheel or fake bolts around the wheel or in between the spokes etc. Good Lord design some more wheels without all the little fake rivets all over them. They look like crap, corrode quickly, are harder to keep clean especially when off roading. Personally I much prefer a cleaner looking wheel with not too many spokes, there easier to keep clean and look nicer.

So, if I were to get new wheels right now it would have to be ones without all the fake rivets/bolts etc. and I would want bronze or brownish wheels to go with my new decals and the sarge green. Unfortunately this severely limits my selection, so I will wait and see how things change down the road.

 

[Gladius Nova]

Just outfitted 17” Black Rhino Overlands wrapped in 35” Nitto’s. Super happy with the look.

Looks great! Those are the rims I initially wanted but they were on back order for about 4 months at the time! I settled for my second choice which I am quite happy with.

 

[dcm80401]

Method Race Wheels MR703 on 35” KO2

Nice, I have a set of the 703 in Gloss Titanium ordered for my Crystal Granite 22 4xe incoming order.

Sponsored