danny01
Well-Known Member
- Thread starter
- #1
This is the first write-up I've done here on the forums so feel free to message me if you have any questions. Ever since Joe added the ability to turn on Automatic Climate Control for those who upgraded to the 7-inch UConnect, there's been many of us who wondered how we could add the missing sensors to make the "Auto" feature work as intended. I've had these sensors installed on my Jeep since April of last year, and it thought I would share on here a detailed guide on how to do it.
Be warned, there's a lot of information on the guide itself so make sure to read all of it thoroughly before attempting anything. Make sure to familiarize yourself with the wording used as to not get confused later on. Basic electrical and wiring knowledge is need to do this install.
The guide covers those of you who have an existing sun sensor on their Jeeps as well as us who have the base model and do not.
Be warned, there's a lot of information on the guide itself so make sure to read all of it thoroughly before attempting anything. Make sure to familiarize yourself with the wording used as to not get confused later on. Basic electrical and wiring knowledge is need to do this install.
The guide covers those of you who have an existing sun sensor on their Jeeps as well as us who have the base model and do not.
Sponsored
Attachments
-
878.8 KB Views: 4,167
-
66.9 KB Views: 1,433