TyRoosevelt
Well-Known Member
- First Name
- Tyler
- Joined
- Aug 28, 2020
- Threads
- 15
- Messages
- 66
- Reaction score
- 43
- Location
- Colorado Springs
- Vehicle(s)
- 2024 Jeep JL
- Thread starter
- #1
There are a lot of posts about the short gas cap tether but no one has produced a solution that works for everyone.
My gas cap tether was 5 inches. If you order the part number 52030377AB, it will give you a gas cap for other fiat chrysler vehicles. The new tether is 7 and 3/8 inches long. Remove the tether from your fuel door using a trim removal tool (those quarter panels can warp if you get too aggressive), remove the other end from the cap and put the tether from the part number above on your gas cap. It is the same style tether with the same exact ends. The length is the only difference. The gas cap for the part number above is around 15 bucks and this took all of 1 minute.
My gas cap tether was 5 inches. If you order the part number 52030377AB, it will give you a gas cap for other fiat chrysler vehicles. The new tether is 7 and 3/8 inches long. Remove the tether from your fuel door using a trim removal tool (those quarter panels can warp if you get too aggressive), remove the other end from the cap and put the tether from the part number above on your gas cap. It is the same style tether with the same exact ends. The length is the only difference. The gas cap for the part number above is around 15 bucks and this took all of 1 minute.
Sponsored