Joaozao
Well-Known Member
- First Name
- Joao
- Joined
- Oct 28, 2018
- Threads
- 5
- Messages
- 108
- Reaction score
- 46
- Location
- New Jersey
- Vehicle(s)
- 2019 Wrangler Sport S
- Thread starter
- #1
So I upgraded my 7' in my 2019 Sport S to an 8.4 that I purchased here on the forum.
It came with the following version:
With a take off I expected to never receive any OTA's nor dealer support and after a bit of searching I have found USB files that worked for me to update my radio.
*Disclaimer - These files worked for me but I am not responsible if you have any issues*
I found various UAQ update files that someone posted here on a Ram forum.
I used the UAQ 34.2 Update file, extracted it and placed it on a USB flash drive that I had. I turned on the Jeep with the flash drive in the USB 1 and let the update run it's course.
Overall the update only took around 15 minutes. I let the car idle while the update ran and did not keep an eye on it. I was greeted with the following screen when the update completed:
Everything seems to be working well for me now. I will report back if I stumble upon any issues.
It came with the following version:
With a take off I expected to never receive any OTA's nor dealer support and after a bit of searching I have found USB files that worked for me to update my radio.
*Disclaimer - These files worked for me but I am not responsible if you have any issues*
I found various UAQ update files that someone posted here on a Ram forum.
I used the UAQ 34.2 Update file, extracted it and placed it on a USB flash drive that I had. I turned on the Jeep with the flash drive in the USB 1 and let the update run it's course.
Overall the update only took around 15 minutes. I let the car idle while the update ran and did not keep an eye on it. I was greeted with the following screen when the update completed:
Everything seems to be working well for me now. I will report back if I stumble upon any issues.
Sponsored