35 inch tires on stock wheels

[blnewt]

@DadJokes had a source for 1" spacers, might shoot him a PM for details.

Sponsored

 

[DadJokes]

https://www.motorsport-tech.com/4DCGI/clickedRADIOBUTTONonPre_truck

 

[JLUSDIEM]

I have 1.25 Bora spacers due to deliver on the 7th. Not expecting any issues with the stud length since I’m on OE wheels with deep relief pockets.

ah ok, yea looks like it would work with a smaller spacer then. nice

 

[6th Floor Mule]

ah ok, yea looks like it would work with a smaller spacer then. nice

DadJokes researched extensively and posted some great info on this subject in previous threads. Good reading if you have the time.

 

[DadJokes]

1” spacers work with factory wheel pockets. That’s the limit. I think I might’ve given how much clearance was remaining between the factory wheel pocket and the end of the stud.

 

[DadJokes]

Here’s more information on what I found with my custom made spacers. (At least a two week turnaround)

The factory studs protrude .410” with the 1” spacer installed. The factory pockets on my 2019 Sahara Upgrade wheels are about .750” deep measuring with a depth gauge.

 

[Siblueg]

315/70/17 with Terra Flex 1.5 spacer lift

 

[americonium]

Thank you everyone that contributed to this thread. Came home with 315/70/17 on stock Rubicon rims and stock suspension. Going to the Jeep Jamboree next weekend, I'll report on what an awesome time I had when I return. Currently sitting at 33psi after chalk test, and used OBD JScan to make the adjustments. There's a lot of good info in this thread, you just have to be patient and read the whole thing through.

 

[americonium]

Post Greenbrier Jeep Jamboree, no rubbing, no turning issues, had lots of full lock either side and full stuff. Very capable, aired down to 15pai all weekend. No issues whatsoever.

Thanks again everyone, I'm very happy with the tires.

 

[GIJL]

Costco said they would only go up 3% from the stock tires but I bought the 35x12.5x17 anyway. Surprisingly they mounted them. Look great!

 

[cmcclintock]

Nicely done. Looks great. What was out the door price at Costco.

 

[GIJL]

Nicely done. Looks great. What was out the door price at Costco.

$2,000 included 5 wheels, mounting, balancing, new TPMS, and great warranty.

Sponsored