2021 Rubicon XR mods and stuff

[Roky]

Got bored….found little red top hats for the zerks on Amazon

Sponsored

 

[19 JLUR Bright Whit3]

Dont ask. Girls cover things that might get dirty. The wifey puts doilies on the stovetop burners. LOL

 

[Jazzicon]

Dont ask. Girls cover things that might get dirty. The wifey puts doilies on the stovetop burners. LOL

He’s not wrong

 

[Roky]

He’s not wrong

I have 23 grease fittings, do they sell them in bulk ? ………

 

[19 JLUR Bright Whit3]

I have 23 grease fittings, do they sell them in bulk ? ………

Only in pink! LOL

I'm gonna go out and count. You better be right!

 

[Roky]

Only in pink! LOL

I'm gonna go out and count. You better be right!

Let’s see…..

drag link - 2
tie rod - 2
Front UCAs - 2
Front LCAs - 2
Sector shaft brace -1
Track bar - 1
Ball joints - 4
Driveshaft - 2
Rear LCAs - 2
Rear UCA. - 2
Rear track bar - 1
Rear sway links - 4
RCVs - 2

Oops… more than 23……..

 

[19 JLUR Bright Whit3]

Let’s see…..

drag link - 2
tie rod - 2
Front UCAs - 2
Front LCAs - 2
Sector shaft brace -1
Track bar - 1
Ball joints - 4
Driveshaft - 2
Rear LCAs - 2
Rear UCA. - 2
Rear track bar - 1
Rear sway links - 4
RCVs - 2

Oops… more than 23……..

 

[Jazzicon]

Let’s see…..

drag link - 2
tie rod - 2
Front UCAs - 2
Front LCAs - 2
Sector shaft brace -1
Track bar - 1
Ball joints - 4
Driveshaft - 2
Rear LCAs - 2
Rear UCA. - 2
Rear track bar - 1
Rear sway links - 4
RCVs - 2

Oops… more than 23……..

Rookie numbers……

 

[Jazzicon]

My friend tried to send me up the easier line….

 

[Jazzicon]

Caster was always a bit high, but it drove great. However, now that the lift settled a bit it got higher. I don’t pretend to know the science behind it, but I did adjust my LCA’s in two turns to 24 1/4.

 

[Jazzicon]

Love the flex…

 

[Jazzicon]

Figured I would add this here too. Looks like the factory drag link….specifically the joint at the pitman arm couldn’t handle all the super cool flex of my lift.

The RK trackbar on the frame side seems to be moving a bit as well.

Ordered a new tie rod and drag link. I’m going with aluminum because it looks pretty . I will fix all the bits once my parts arrive because I’m too lazy to inspect just the track bar.

 

[Jazzicon]

Still waiting on parts, but at least I had an excuse to get some new tools….

 

[Jazzicon]

Why the hell didn’t anyone tell me how loud that would be

 

[19 JLUR Bright Whit3]

Why the hell didn’t anyone tell me how loud that would be

I prefer a pickle fork if I'm not re-using the end.

Sponsored