2021 Rubicon XR mods and stuff

[Roky]

Here you go. Also, since we are on the subject, would you know if a fastback style soft top rear window would clear this shelf?

Don’t mean to chime in, but if you’re considering the trek top, I recommend the @Bestop Trek Top Ultra, it folds all the way down like a standard ragtop. Very well made and no zippers, which I love…..Most trek tops don’t fold all the way. If you need any measurements holler.
Here it is down, and it takes like 5 seconds to flip it back in sun rider position

Sponsored

 

[Jazzicon]

Don’t mean to chime in, but if you’re considering the trek top, I recommend the @Bestop Trek Top Ultra, it folds all the way down like a standard ragtop. Very well made and no zippers, which I love…..Most trek tops don’t fold all the way. If you need any measurements holler.
Here it is down, and it takes like 5 seconds to flip it back in sun rider position

You rock! I would need to replace the shelf because like a dumb ass, I ordered the one that mounts to the roll bar, not the tub . However, if the rear window can clear the shelf, I can get the regular Bestop Trek Top and still get the fastback goodness and some open air. I will post up some measurements in a few and maybe you can see if it’s doable. Thank you!!

 

[Jazzicon]

Don’t mean to chime in, but if you’re considering the trek top, I recommend the @Bestop Trek Top Ultra, it folds all the way down like a standard ragtop. Very well made and no zippers, which I love…..Most trek tops don’t fold all the way. If you need any measurements holler.
Here it is down, and it takes like 5 seconds to flip it back in sun rider position

Here are some measurements I took. And yes, I used a pink level .

 

[Roky]

Here are some measurements I took. And yes, I used a pink level .

Ok….. give me the overall dimensions of what you have in the back also, I see height , need depth and width. And is it tight to back seat ?

 

[Jazzicon]

Ok….. give me the overall dimensions of what you have in the back also, I see height , need depth and width. And is it tight to back seat ?

So it’s about 2.25” from the backseat.

if I measure from the backseat to the edge of the shelf I get 26.5” which Im

The shelf itself is 40.5” long and 24.25” wide

 

[Roky]

So it’s about 2.25” from the backseat.

if I measure from the backseat to the edge of the shelf I get 26.5” which Im

The shelf itself is 40.5” long and 24.25” wide

Ok I’m on my way home, I’ll get back to you in a bit….. and for the record, your rig would look badass with the trek top….. just sayin..

 

[Jazzicon]

Ok I’m on my way home, I’ll get back to you in a bit….. and for the record, your rig would look badass with the trek top….. just sayin..

Thank you sooooo much!

 

[Roky]

Thank you sooooo much!

No worries…. It’ll fit but shelf will have to go almost touching back seat. Also when folded down it will ride on shelf, but that’s not a big deal, only up a few inches from all the way down.

The two mechanisms that fold top all the way down are up out of the way. Here’s pics, let me know if you need another angle or measurement, I’m out in garage working anyway.

The last two pics is it all the way down and then I was holding up where it would be on shelf. Wouldn’t be able to carry anything on shelf higher than the top lip of shelf towards the tailgate though.

 

[Jazzicon]

No worries…. It’ll fit but shelf will have to go almost touching back seat. Also when folded down it will ride on shelf, but that’s not a big deal, only up a few inches from all the way down.

The two mechanisms that fold top all the way down are up out of the way. Here’s pics, let me know if you need another angle or measurement, I’m out in garage working anyway.

The last two pics is it all the way down and then I was holding up where it would be on shelf. Wouldn’t be able to carry anything on shelf higher than the top lip of shelf towards the tailgate though.

Damn I love that top. I would need the trek top that doesn’t fold because my shelf mounts to the roll bar where the folding doohickey for the top is mounted. As long as the back window will clear the shelf I’m good for the regular fastback trek top.
Decisions…decisions….sell the shelf and get one that mounts to the tub for the folding trek top . Stick with the hardtop so I can keep my apocalypse camping gear….minimize what I carry and go with the non folding trek top….arrrrgh. Gulp…trade my Benelli M4 for a foldy trek top

 

[KNN]

@Roky is the most helpful Jeeper ever!! Roky for el Presidente.

 

[Roky]

Damn I love that top. I would need the trek top that doesn’t fold because my shelf mounts to the roll bar where the folding doohickey for the top is mounted. As long as the back window will clear the shelf I’m good for the regular fastback trek top.
Decisions…decisions….sell the shelf and get one that mounts to the tub for the folding trek top . Stick with the hardtop so I can keep my apocalypse camping gear….minimize what I carry and go with the non folding trek top….arrrrgh. Gulp…trade my Benelli M4 for a foldy trek top

Sorry, I’m not gonna be any help on that decision at all. But I’ll say this, for me I wanted this top, so I’m building my interior around it.

This is as nekid as you can get with regular trek top your friends will be fighting about who has to ride under the top,…..

 

[DesertDweller520]

My Snazzberry Jeep is stranded somewhere in NC awaiting its final destination to my dealer. However, all the parts I’ve been ordering are starting to trickle in. I have more Jeep parts than Jeep at the moment.

First change will be ditching the factory plastic bumper for this Rugged Ridge Arcus front bumper.

A winch is on the way.

After that I’m deciding between a steering stabilizer relocation bracket, sliders, diff skids, engine skid or rear LCA skids. Any particular order recommendations for the next mod?

This will be my first Jeep ever and I hope to get it out to Uwharrie and have some fun.

Congrats, I just pick up my Snaz XR the other day and absolutely love it. I’m also rocking the plastic bumpers at the moment but it’s all good. Hope you get it soon

 

[Jazzicon]

@pixeldecals for the win

 

[Jazzicon]

Bestop Sunrider installed…

 

[TX_Ovrlnd]

Bestop Sunrider installed…

I want one of those and my Wrangler isn't even here yet. I know it's new, but how do you like it so far? How's the noise when closed?

Sponsored