AppleJacks23
Well-Known Member
- First Name
- A.J.
- Joined
- Jun 25, 2020
- Threads
- 14
- Messages
- 135
- Reaction score
- 169
- Location
- Rockwall, TX
- Website
- www.revkit.com
- Vehicle(s)
- 2021 JLURD
- Build Thread
- Link
- Occupation
- Human Resources
- Vehicle Showcase
- 1
- Thread starter
- #1
Hello all! Starting the process with our new 2021 JLURD. Picked up from Demontrond on Conroe, TX on 9/29 and home hours later to Rockwall. I'll add my factory bills list later. Hard top off same day with first mod- topsy brackets. Soft top on, found out rear passenger window won't go down. Before getting in to the dealer to fix (bad window motor), installed driver and passenger bulletproof dash mounted, CMM brackets for mirrors, and husky for liners. In to the shop on Thursday 10/1, back morning of 10/3. GPCA grab handles on that day. Put the CoverKing Topliner on the freedom panels (all need to do the hard top). Sunday 10/4 brought tazer mini, ham antenna bracket install and wire routing, and kc hilites under hood lights. Used 2 of the trim clip holes to mount the lights (5/16 x 3/4 sheet metal hex screws btw!). Today added the 12v accessory harness being the ignition switched port to direct wire my radar detector. Yaesu ft-8900r next thing to go in, probably under the passenger seat. I'll come back and clean this up. Just wanted to get started with a log before I forget!
Sponsored