2021 Jeep Rubicon 392 first Vin and order, build and delivery tracking list

[Membrain]

6/13 2359 CST UPDATE


At this point, not sure if any of the remaining VINs on the list are going to be MY22...

The new way to check your own status:
https://www.jeep.com/trackyourorder.html#/landing

Checking for new WindowStickers and/or BuildSheets...

0 tracked VIN(s) with BOTH new BuildSheet(s) AND WindowSticker(s):

0 tracked VIN(s) with new BuildSheet(s):

0 tracked VIN(s) with new WindowSticker(s):


NOTE - Buildsheets and WindowStickers only become available at a certain sequence of the build which is why you may not see yours yet.

Here is what I am tracking if anyone is interested in what the sheet looks like (K.I.S.S.):
Hhttps://docs.google.com/spreadsheets/d/e/2PACX-1vRloyj9uYukWpXNxIUmJad_X2pX69IFr_s-vrRQr35K7CyjsKFSyrtX9pRMYQ0m1_eAMafeGpTnjvVt/pubhtml

Just copy the link and correct the "Hhttps" typo to "https" - I did this so as not to blow up the thread. Take the spreadsheet and run with it - make it your own - add your VIN to it.

You can do what I do to check your VIN daily with the following links:

BuildSheet (add your full VIN after the "=" ):
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=

WindowSticker (add your full VIN aftet the "=" ):
https://www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=

https://www.jeep.com/trackyourorder.html#/landing

Sponsored

 

[Brew211]

My order just went from a 6/14 delivery date to a new date of "TBD"

I'm wondering if it is because I ordered the "mirrors off kit" which I regret. Has anyone received this kit?

 

[Membrain]

6/14 2230 CST UPDATE


At this point, not sure if any of the remaining VINs on the list are going to be MY22...

The new way to check your own status:
https://www.jeep.com/trackyourorder.html#/landing

Checking for new WindowStickers and/or BuildSheets...

0 tracked VIN(s) with BOTH new BuildSheet(s) AND WindowSticker(s):

2 tracked VIN(s) with new BuildSheet(s):
149164 zynith <--- Todd!
155570 granite crystal <--- Gabe!

0 tracked VIN(s) with new WindowSticker(s):


NOTE - Buildsheets and WindowStickers only become available at a certain sequence of the build which is why you may not see yours yet.

Here is what I am tracking if anyone is interested in what the sheet looks like (K.I.S.S.):
Hhttps://docs.google.com/spreadsheets/d/e/2PACX-1vRloyj9uYukWpXNxIUmJad_X2pX69IFr_s-vrRQr35K7CyjsKFSyrtX9pRMYQ0m1_eAMafeGpTnjvVt/pubhtml

Just copy the link and correct the "Hhttps" typo to "https" - I did this so as not to blow up the thread. Take the spreadsheet and run with it - make it your own - add your VIN to it.

You can do what I do to check your VIN daily with the following links:

BuildSheet (add your full VIN after the "=" ):
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=

WindowSticker (add your full VIN aftet the "=" ):
https://www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=

https://www.jeep.com/trackyourorder.html#/landing

 

[Membrain]

My order just went from a 6/14 delivery date to a new date of "TBD"

I'm wondering if it is because I ordered the "mirrors off kit" which I regret. Has anyone received this kit?

Looks like you got the windowsticker this evening!

 

[Brew211]

You're right, thanks @Membrain . Question, my build sheet calls for the 4.56 gearing but the window sticker does not include that option, have you seen that before?

 

[Membrain]

You're right, thanks @Membrain . Question, my build sheet calls for the 4.56 gearing but the window sticker does not include that option, have you seen that before?

Should be a part of the XR package with 35" tires... dunno why it isn't listed - make a note to check the tag on the diff to see what gears they put in... and it IS indeed noted on page 8 of the buildsheet.

 

[Brew211]

Should be a part of the XR package with 35" tires... dunno why it isn't listed - make a note to check the tag on the diff to see what gears they put in... and it IS indeed noted on page 8 of the buildsheet.

You the Man!

 

[Membrain]

6/15 2230 CST UPDATE


At this point, not sure if any of the remaining VINs on the list are going to be MY22...

The new way to check your own status:
https://www.jeep.com/trackyourorder.html#/landing

Checking for new WindowStickers and/or BuildSheets...

0 tracked VIN(s) with BOTH new BuildSheet(s) AND WindowSticker(s):

0 tracked VIN(s) with new BuildSheet(s):

0 tracked VIN(s) with new WindowSticker(s):


NOTE - Buildsheets and WindowStickers only become available at a certain sequence of the build which is why you may not see yours yet.

Here is what I am tracking if anyone is interested in what the sheet looks like (K.I.S.S.):
Hhttps://docs.google.com/spreadsheets/d/e/2PACX-1vRloyj9uYukWpXNxIUmJad_X2pX69IFr_s-vrRQr35K7CyjsKFSyrtX9pRMYQ0m1_eAMafeGpTnjvVt/pubhtml

Just copy the link and correct the "Hhttps" typo to "https" - I did this so as not to blow up the thread. Take the spreadsheet and run with it - make it your own - add your VIN to it.

You can do what I do to check your VIN daily with the following links:

BuildSheet (add your full VIN after the "=" ):
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=

WindowSticker (add your full VIN aftet the "=" ):
https://www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=

https://www.jeep.com/trackyourorder.html#/landing

 

[Membrain]

6/16 2230 CST UPDATE


At this point, not sure if any of the remaining VINs on the list are going to be MY22...

The new way to check your own status:
https://www.jeep.com/trackyourorder.html#/landing

Checking for new WindowStickers and/or BuildSheets...

0 tracked VIN(s) with BOTH new BuildSheet(s) AND WindowSticker(s):

0 tracked VIN(s) with new BuildSheet(s):

0 tracked VIN(s) with new WindowSticker(s):


NOTE - Buildsheets and WindowStickers only become available at a certain sequence of the build which is why you may not see yours yet.

Here is what I am tracking if anyone is interested in what the sheet looks like (K.I.S.S.):
Hhttps://docs.google.com/spreadsheets/d/e/2PACX-1vRloyj9uYukWpXNxIUmJad_X2pX69IFr_s-vrRQr35K7CyjsKFSyrtX9pRMYQ0m1_eAMafeGpTnjvVt/pubhtml

Just copy the link and correct the "Hhttps" typo to "https" - I did this so as not to blow up the thread. Take the spreadsheet and run with it - make it your own - add your VIN to it.

You can do what I do to check your VIN daily with the following links:

BuildSheet (add your full VIN after the "=" ):
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=

WindowSticker (add your full VIN aftet the "=" ):
https://www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=

https://www.jeep.com/trackyourorder.html#/landing

 

[Membrain]

6/17 2359 CST UPDATE


At this point, not sure if any of the remaining VINs on the list are going to be MY22...

The new way to check your own status:
https://www.jeep.com/trackyourorder.html#/landing

Checking for new WindowStickers and/or BuildSheets...

0 tracked VIN(s) with BOTH new BuildSheet(s) AND WindowSticker(s):

0 tracked VIN(s) with new BuildSheet(s):

0 tracked VIN(s) with new WindowSticker(s):


NOTE - Buildsheets and WindowStickers only become available at a certain sequence of the build which is why you may not see yours yet.

Here is what I am tracking if anyone is interested in what the sheet looks like (K.I.S.S.):
Hhttps://docs.google.com/spreadsheets/d/e/2PACX-1vRloyj9uYukWpXNxIUmJad_X2pX69IFr_s-vrRQr35K7CyjsKFSyrtX9pRMYQ0m1_eAMafeGpTnjvVt/pubhtml

Just copy the link and correct the "Hhttps" typo to "https" - I did this so as not to blow up the thread. Take the spreadsheet and run with it - make it your own - add your VIN to it.

You can do what I do to check your VIN daily with the following links:

BuildSheet (add your full VIN after the "=" ):
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=

WindowSticker (add your full VIN aftet the "=" ):
https://www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=

https://www.jeep.com/trackyourorder.html#/landing

 

[Membrain]

6/19 2255 CST UPDATE


At this point, not sure if any of the remaining VINs on the list are going to be MY22...

The new way to check your own status:
https://www.jeep.com/trackyourorder.html#/landing

Checking for new WindowStickers and/or BuildSheets...

0 tracked VIN(s) with BOTH new BuildSheet(s) AND WindowSticker(s):

0 tracked VIN(s) with new BuildSheet(s):

0 tracked VIN(s) with new WindowSticker(s):


NOTE - Buildsheets and WindowStickers only become available at a certain sequence of the build which is why you may not see yours yet.

Here is what I am tracking if anyone is interested in what the sheet looks like (K.I.S.S.):
Hhttps://docs.google.com/spreadsheets/d/e/2PACX-1vRloyj9uYukWpXNxIUmJad_X2pX69IFr_s-vrRQr35K7CyjsKFSyrtX9pRMYQ0m1_eAMafeGpTnjvVt/pubhtml

Just copy the link and correct the "Hhttps" typo to "https" - I did this so as not to blow up the thread. Take the spreadsheet and run with it - make it your own - add your VIN to it.

You can do what I do to check your VIN daily with the following links:

BuildSheet (add your full VIN after the "=" ):
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=

WindowSticker (add your full VIN aftet the "=" ):
https://www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=

https://www.jeep.com/trackyourorder.html#/landing

 

[Membrain]

6/20 2315 CST UPDATE


At this point, not sure if any of the remaining VINs on the list are going to be MY22...

The new way to check your own status:
https://www.jeep.com/trackyourorder.html#/landing

Checking for new WindowStickers and/or BuildSheets...

0 tracked VIN(s) with BOTH new BuildSheet(s) AND WindowSticker(s):

0 tracked VIN(s) with new BuildSheet(s):

0 tracked VIN(s) with new WindowSticker(s):


NOTE - Buildsheets and WindowStickers only become available at a certain sequence of the build which is why you may not see yours yet.

Here is what I am tracking if anyone is interested in what the sheet looks like (K.I.S.S.):
Hhttps://docs.google.com/spreadsheets/d/e/2PACX-1vRloyj9uYukWpXNxIUmJad_X2pX69IFr_s-vrRQr35K7CyjsKFSyrtX9pRMYQ0m1_eAMafeGpTnjvVt/pubhtml

Just copy the link and correct the "Hhttps" typo to "https" - I did this so as not to blow up the thread. Take the spreadsheet and run with it - make it your own - add your VIN to it.

You can do what I do to check your VIN daily with the following links:

BuildSheet (add your full VIN after the "=" ):
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=

WindowSticker (add your full VIN aftet the "=" ):
https://www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=

https://www.jeep.com/trackyourorder.html#/landing

 

[Membrain]

6/21 2215 CST UPDATE


At this point, not sure if any of the remaining VINs on the list are going to be MY22...

The new way to check your own status:
https://www.jeep.com/trackyourorder.html#/landing

Checking for new WindowStickers and/or BuildSheets...

0 tracked VIN(s) with BOTH new BuildSheet(s) AND WindowSticker(s):

0 tracked VIN(s) with new BuildSheet(s):

0 tracked VIN(s) with new WindowSticker(s):


NOTE - Buildsheets and WindowStickers only become available at a certain sequence of the build which is why you may not see yours yet.

Here is what I am tracking if anyone is interested in what the sheet looks like (K.I.S.S.):
Hhttps://docs.google.com/spreadsheets/d/e/2PACX-1vRloyj9uYukWpXNxIUmJad_X2pX69IFr_s-vrRQr35K7CyjsKFSyrtX9pRMYQ0m1_eAMafeGpTnjvVt/pubhtml

Just copy the link and correct the "Hhttps" typo to "https" - I did this so as not to blow up the thread. Take the spreadsheet and run with it - make it your own - add your VIN to it.

You can do what I do to check your VIN daily with the following links:

BuildSheet (add your full VIN after the "=" ):
https://www.jeep.com/webselfservice/BuildSheetServlet?vin=

WindowSticker (add your full VIN aftet the "=" ):
https://www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin=

https://www.jeep.com/trackyourorder.html#/landing

 

[Azreed2000]

My order just went from a 6/14 delivery date to a new date of "TBD"

I'm wondering if it is because I ordered the "mirrors off kit" which I regret. Has anyone received this kit?

I received the kit with my build. I'm regretting ordering them now. I have a set of Quadratec tube doors that have mirrors on them and you cannot use the tube doors with the kit. Looks like the kit uses the top door hinge as a part of the installation.

 

[Brew211]

I received the kit with my build. I'm regretting ordering them now. I have a set of Quadratec tube doors that have mirrors on them and you cannot use the tube doors with the kit. Looks like the kit uses the top door hinge as a part of the installation.

Bummer! I didn't know that it used the door hinge. I have the tube doors but I hate the fisheye mirrors from CMM Offroad, I was hoping this was the solution.

Sponsored