2020 JLR Trip A/B Reset

[DCerveza]

I've followed the instructions in the manual (I think) and searched the forum on resetting the trip odometers without success. I love the instrument clusters layout flexibly but resetting these trip odometers should be the simplest thing so if anyone can give EXACT instructions I would really appreciate it.

Sponsored

 

[phranque1673]

I have a 2019, but should be the same. Bring up the trip odometer in the main screen. Once up, hold down the OK button on the steering wheel for a few seconds. That resets the trip reading. I do it every tank for tracking my MPG. Hope this helps.

 

[DCerveza]

I have the Trip B in the upper left, when highlighted I've held the OK button but it does not reset.

 

[phranque1673]

Turn the ignition on > Use the up or down arrows on the left steering wheel control until the trip shows in the middle screen (Screen 6) > then press the OK button. To switch between A and B use the left and right buttons whil the trip is displayed.

 

[DCerveza]

Thank you, your EXACT instructions were spot on.

 

[MarkY3130]

I have a 2019, but should be the same. Bring up the trip odometer in the main screen. Once up, hold down the OK button on the steering wheel for a few seconds. That resets the trip reading. I do it every tank for tracking my MPG. Hope this helps.

“Bring up the trip odometer in the MAIN SCREEN” seemed EXACT enough to me

Glad you got it figured out (OP)

Sponsored