Thatjeepguy
New Member
- First Name
- Joe
- Joined
- Jun 6, 2023
- Threads
- 1
- Messages
- 2
- Reaction score
- 0
- Location
- Jacksonville
- Vehicle(s)
- 2020 wrangler jl sahara 2.0
- Thread starter
- #1
Hi everyone.
I have a 2020 wrangler jl unlimited Sahara 2.0 and have a couple of problems.
Firts one is the Ignition won’t go from Off to ACC or RUN. All the Interior or exterior l ligts are working, ignition switch is lit. I changed the keyfob battery, tried pushing with keyfob but nothing; it stays on OFF.
Second one is the power locks don’t work. When I want to lock or unlock using keyfob I hear clicking noise from BCM, exterior lights flash and horn goes off. Anti theft is also active (they activate when I open a door) but doors won’t lock.
I’ve checked the fuses, connections, can bus connections if they are loose, replaced the battery, finally switched the fusebox but no luck so far. My jeep doesn’t run on secondary battery so it’s not that.
I am open to any suggestions. Thanks
I have a 2020 wrangler jl unlimited Sahara 2.0 and have a couple of problems.
Firts one is the Ignition won’t go from Off to ACC or RUN. All the Interior or exterior l ligts are working, ignition switch is lit. I changed the keyfob battery, tried pushing with keyfob but nothing; it stays on OFF.
Second one is the power locks don’t work. When I want to lock or unlock using keyfob I hear clicking noise from BCM, exterior lights flash and horn goes off. Anti theft is also active (they activate when I open a door) but doors won’t lock.
I’ve checked the fuses, connections, can bus connections if they are loose, replaced the battery, finally switched the fusebox but no luck so far. My jeep doesn’t run on secondary battery so it’s not that.
I am open to any suggestions. Thanks
Sponsored