Rangemaster
Well-Known Member
Nice, that was fast.Holy shit. Steps got delivered today. Now I know what my plans are for this Saturday lol. Pics in my build thread later.
Sponsored
Nice, that was fast.Holy shit. Steps got delivered today. Now I know what my plans are for this Saturday lol. Pics in my build thread later.
I have the LoD signature front and like it so much, I just ordered the rear with a tire carrier. So I guess Iāve cast my vote.Could use folks help in deciding between 2 BF deals for bumpers and winch (or other suggestions):
1. 4WParts
- Deal - Buy front and rear Fab Fours bumpers and get free winch + 50% off install:
- Stubby front bumper $549
- Rear bumper (no tire carrier) $1,160 *
- Winch - Smittybuilt XRC Gen3 9.5K steel cable (normally $429) $Free **
- Sway bar cover $200
- Install ($540+$270 x 50%) $405
Total $2,315
*the price of the rear bumper is my main sticking point
**will upgrade to synthetic for $150 - I know what Iām getting here vs the Warn Zeon or Smittybuilt X20, but fits my needs (and is the Gen3)
2. NR4x4
- Deal - 15% off:
- LOD stubby Signature front bumper *** $553
- LOD rear bumper Destroyer (no tire carrier) $687
- Winch - smittybuilt X20 Gen2 10K $420
- Skid plate $109
- Install at 4WP $810
Total $2,579
*** this allows for a recessed winch that I prob prefer the look of more
Bonus question - what do you all do for the rear license plate relocation - the brackets here cost $200 which seems crazy?
Any perspectives welcome!
LOD all day long.Could use folks help in deciding between 2 BF deals for bumpers and winch (or other suggestions):
1. 4WParts
- Deal - Buy front and rear Fab Fours bumpers and get free winch + 50% off install:
- Stubby front bumper $549
- Rear bumper (no tire carrier) $1,160 *
- Winch - Smittybuilt XRC Gen3 9.5K steel cable (normally $429) $Free **
- Sway bar cover $200
- Install ($540+$270 x 50%) $405
Total $2,315
*the price of the rear bumper is my main sticking point
**will upgrade to synthetic for $150 - I know what Iām getting here vs the Warn Zeon or Smittybuilt X20, but fits my needs (and is the Gen3)
2. NR4x4
- Deal - 15% off:
- LOD stubby Signature front bumper *** $553
- LOD rear bumper Destroyer (no tire carrier) $687
- Winch - smittybuilt X20 Gen2 10K $420
- Skid plate $109
- Install at 4WP $810
Total $2,579
*** this allows for a recessed winch that I prob prefer the look of more
Bonus question - what do you all do for the rear license plate relocation - the brackets here cost $200 which seems crazy?
Any perspectives welcome!
I'll be watching, just placed my order for the RSE steps with free lights.Holy shit. Steps got delivered today. Now I know what my plans are for this Saturday lol. Pics in my build thread later.
Ordered a destroyer stubby yesterday also. gonna have to give some thought to which couch im gonna crash on when it shows up....Dang. All this praise for LOD got me to hit the purchase button. Destroyer stubby front with skid plate and rear destroyer shorty bumper. Been looking at them for a long time and couldn't resist anymore. Thanks all, now to explain to the wife.
You'll also want to pickup the Metalcloak trailer armor thingie - it works perfectly with the LOD destroyer rear and not only protects that plug but it also looks finished.Dang. All this praise for LOD got me to hit the purchase button. Destroyer stubby front with skid plate and rear destroyer shorty bumper. Been looking at them for a long time and couldn't resist anymore. Thanks all, now to explain to the wife.
I haveCould use folks help in deciding between 2 BF deals for bumpers and winch (or other suggestions):
1. 4WParts
- Deal - Buy front and rear Fab Fours bumpers and get free winch + 50% off install:
- Stubby front bumper $549
- Rear bumper (no tire carrier) $1,160 *
- Winch - Smittybuilt XRC Gen3 9.5K steel cable (normally $429) $Free **
- Sway bar cover $200
- Install ($540+$270 x 50%) $405
Total $2,315
*the price of the rear bumper is my main sticking point
**will upgrade to synthetic for $150 - I know what Iām getting here vs the Warn Zeon or Smittybuilt X20, but fits my needs (and is the Gen3)
2. NR4x4
- Deal - 15% off:
- LOD stubby Signature front bumper *** $553
- LOD rear bumper Destroyer (no tire carrier) $687
- Winch - smittybuilt X20 Gen2 10K $420
- Skid plate $109
- Install at 4WP $810
Total $2,579
*** this allows for a recessed winch that I prob prefer the look of more
Bonus question - what do you all do for the rear license plate relocation - the brackets here cost $200 which seems crazy?
Any perspectives welcome!
Between this thread and the 15% off LOD has going on, I am 99.99% going with LOD Signature full width and their Destroyer rear w/tire carrier. Question, which may be a little bit of over analysis, in pictures the angles of front signature series vs rear destroyer series appear to be close enough that theyāll look good together, but has anyone seen that setup in person? I donāt want the destroyer front bumper because of the surface winch mount.I have the LoD signature front and like it so much, I just ordered the rear with a tire carrier. So I guess Iāve cast my vote.
Not bad for the RSE steps. NR charges sales tax though and Rebel Off Road has them for $1715 sans tax.So far my one experience with NR is great. Paid for Warn winch and RSE step sliders Thursday night. Got shipping notification Friday morning. All will be delivered on Monday, 11/30. Paid 1709 RSE and got free light kit, plus winch was 10% off as well, along with free shipping. Iād say getting my product within 4 days of ordering during a holiday weekend is pretty impressive.
you are exactly where Iām at - recessed mount onthe signature looks cleaner to me, but curious if rear destroyer matches. Will be looking on google for some photos. Found some in this thread alsoI have
Between this thread and the 15% off LOD has going on, I am 99.99% going with LOD Signature full width and their Destroyer rear w/tire carrier. Question, which may be a little bit of over analysis, in pictures the angles of front signature series vs rear destroyer series appear to be close enough that theyāll look good together, but has anyone seen that setup in person? I donāt want the destroyer front bumper because of the surface winch mount.
Here are some side by sides I made this morning - attached here for you. I think if they all look this good side by side, then all options will look great actually mounted 10 feet apart.you are exactly where Iām at - recessed mount onthe signature looks cleaner to me, but curious if rear destroyer matches. Will be looking on google for some photos. Found some in this thread also
https://www.jlwranglerforums.com/forum/threads/the-aftermarket-bumper-list-jl-jlu-wrangler.2824/
Awesome - thanks.Here are some side by sides I made this morning - attached here for you. I think if they all look this good side by side, then all options will look great actually mounted 10 feet apart.