Sponsored

2019 JLUR , 3.5 MC Gamechanger lift Question

Daleeig

New Member
First Name
Dale
Joined
Dec 27, 2020
Threads
1
Messages
2
Reaction score
0
Location
Hartland, WI
Vehicle(s)
2019 JLUR
Just finished the lift this weekend. My axle harnesses & breathers are short.
Is there an extension I can get extend them?
Sponsored

 

Jeepsk8

Well-Known Member
Joined
May 19, 2018
Threads
14
Messages
2,802
Reaction score
20,360
Location
Sierra Vista, AZ
Vehicle(s)
2020 JLUR
I cut the zip ties holding the harnesses up. There is plenty of slack. As for the breather hose, I just shimmied it down the shock tower as much as I could, which wasn't much, and connected it to the tube a little short of fully on. Do these things at full droop to make sure you have enough slack.
 
OP
OP

Daleeig

New Member
First Name
Dale
Joined
Dec 27, 2020
Threads
1
Messages
2
Reaction score
0
Location
Hartland, WI
Vehicle(s)
2019 JLUR
I cut the zip ties holding the harnesses up. There is plenty of slack. As for the breather hose, I just shimmied it down the shock tower as much as I could, which wasn't much, and connected it to the tube a little short of fully on. Do these things at full droop to make sure you have enough slack.
We did that & still could not reconnect them until the jeep was back on the floor. My breathers don't follow the shock either? Rear is tacked to the underside of the tub, front disappeared into the engine compartment.
Sponsored

 
 



Top