2 Door Rubicon Lifts with 35s - What you got?

[Fast4by]

RC 2.5 Spacer Kit w/ Springs & Shocks off a JLUR
JKS J-Flex Adjustable Control Arms
315/70-17 on Stock Rubi Wheels

Sponsored

 

[Mikester86]

2022 JLR with TeraFlex 2.5” base lift with their VSS 9550 shocks, rear upper adjustable control arms, front HD adjustable track bar, rear track bar relocation bracket and their geometry correction brackets. I have 35x11.5x17 Toyo AT3’s load range C ordered from Discount Tire for install next week. I am having an inner battle of staying with the stock 33’s and canceling the 35’s. Decisions, decisions…..
So for now here it is freshly washed and waxed on the stock 33’s.

Prior to lift below:

 

[Mikester86]

OK, I can officially add here.
2022 JLR 2.0 Turbo with 2.5” TeraFlex base lift, geo correction brackets, HD front adjustable track bar, rear track bar relocation bracket and rear upper adjustable control arm. Factory rims with 35/11.5/17 Toyo Open Country AT3’s.

I asked DT to set all tires to 34 psi. Nope, all 38-39. I dropped them down when I got home.

Still playing around with the ECRI for the speedometer calibration. I think I’m just about there. Been gradually bumping up the size from where I started to match the GPS.

 

[2DR OVRLND]

2” AEV spacer lift…

Can you fully flex without rubbing? Also what size tires are those?

 

[JeffCj7Jl]

Can you fully flex without rubbing? Also what size tires are those?

Yes. I‘ve had it fully flexed, no rubbing at all. They are 315 70r17’s (35’s)

 

[betsy]

Mopar 2” lift, metalcloak control arms, and rear adjustable track bar, JKS front adjustable track bar, metalcloak steering stabilizer relocation kit with a fox steering stabilizer, AEV pintler wheels, 35x11.50R17 nitto ridge grapplers

 

[Dr. RGB]

Clayton 2.5" Overland + with Fox 2.0's on BFG AT 315's. Rides like a dream. New gears coming next month.

 

[GRAK]

Clayton 2.5" Overland + with Fox 2.0's on BFG AT 315's. Rides like a dream. New gears coming next month.

>New gears coming next month.

Going to bigger tires?

 

[dragoneggs]

Finally made my decision and yesterday visited Northridge4x4 and ordered the Clayton 1.5in Overland Plus lift w/Fox 2.0 shocks and will be going to 315/70-17. Will be xmas time before I get it installed. Will of course post pics.

 

[Squibbles]

Been wheeling my Jeep on 315 KO2s with stock Rubicon suspension. Moab, Michigan, Wisconsin.

check out my YouTube channel to see it in action lol ?

https://youtube.com/channel/UCSh-CN5ZGY-Eg8KSYVjoa6g

I’ll go subscribe right now if you’ll just tell me in a few sentences how often you experienced tire rubbing.

 

[Dr. RGB]

>New gears coming next month.

Going to bigger tires?

Not just yet, just stepping up to 4.88's. I will probably step up to true 35's when these tires run out. It's all about the Jeep fitting in the garage.

 

[Northridge4x4]

Finally made my decision and yesterday visited Northridge4x4 and ordered the Clayton 1.5in Overland Plus lift w/Fox 2.0 shocks and will be going to 315/70-17. Will be xmas time before I get it installed. Will of course post pics.

Thanks for the order Mark, we do appreciate it.

And make sure to post up pics when you get a chance to install it!

 

[shane340]

I’ll go subscribe right now if you’ll just tell me in a few sentences how often you experienced tire rubbing.

Here’s a whole video about it. I made it just for you ?

35s and NO LIFT?! Do They Fit Off-Road? Jeep Wrangler JL Rubicon

 

[jaardappel]

2" Mopar with 35 KO2's. I did put Borne Offroad (Mishimoto) 1.2" spacers on the wheels. Minor push outwards but truly helps the look and stability. They are forged, hub-centric with 12.9 hardened studs. Good luck!

 

[zw470]

2" TeraFlex spacers, Sport LCAs, 2.0 Fox Shocks and through-shaft steering stabilizer.

I was concerned my 315s were going to look too small since I've been running them at stock height for so long, but I think it looks fantastic.

Sponsored