2 door owners, what tire size you running? Pics?

[JeepFiend]

pfft, and nobody on 22" spinners? what has this world come to??? ? ? ?

Sponsored

 

[greenMarine]

2" spacer lift from Rubicon Express, (with front and rear adjustable trac-bars), Quadratec Rubicon Xtreme wheels 17x9, 4.75 backspace, 285/70/17 Nitto Ridge Grapplers (116Q these are the 48.74lb variants) and have a less deep tread depth than do the load range E –

 

[Warpath]

Are you using a lift? If so what?
Thanks

This was stock ride height.

 

[Brendon]

285/70/17 with Mopar 2" lift

 

[sourdough]

thanks, food for thought.

 

[Birdsong]

285/70/17 stock height, no lift, but flat fenders.

 

[blnewt]

I ran 37's for 2.5 years and did many famous obstacle trails (rating 7 or less). I have nothing but good to say about Cooper STT PRO 37x12.5r17 D for off-roading.

Now I have BFG KO2's 315/70r17 C. My rigs new duties are more roadtrips and sight seeing in nature. Tires are much easier on the rig and to live with.

Yes, but there's some badassery that went w/ those 37 STTs, no denying that! Even the bulldozer agrees

 

[JLR_AEV]

K02 37x12.5x17
AEV Borah 17x8.5 +4mm offset

 

[navyflyer]

305/70R17, 1 in quadratec wheel spacers, stock lift. Went with 305s because I think the 285s looked a bit small, and the 315s looked too big. Adding Teraflex 1in spacers soon..

 

[JLanesey]

Mine currently has 35x11.5 Toyo AT3. My next tire will likely be the KM3 in 37”. With them measuring closer to 35 I expect the drivability should be similar to current setup with sport stock axles.

 

[dragoneggs]

315 70 17 BFG KO2 on Mopar Simulated Beadlocks 8 x 17 and Mopar 2” lift specific to 2 door 2.0T JL. Added Metalcloak arms, bars, rod, drag link. GenRight rear bumper and carrier aluminum. Smittybilt winch with Warn hook and hook stay. Magnaflow stainless full catback dual exhaust.

That looks right! ?

 

[Jeepish3000]

K02 37x12.5x17
AEV Borah 17x8.5 +4mm offset

What size lift are you running? I want 37's but I'm also worried about the center of gravity being too high for off roading and/or bad road manners

 

[WorkingMan]

265/70 R17 on Fuel Beast 17x10 wheels. I was trying to stay close to the stock tire height. I'm seeing about a 2MPG reduction in efficiency so far. (just got these a couple of days ago)

 

[JLR_AEV]

What size lift are you running? I want 37's but I'm also worried about the center of gravity being too high for off roading and/or bad road manners

Running stock springs in the front but it raised up a bit more when I removed the steel bumper for a lighter AEV front bumper. In the rear I added 1.5 Teraflex spacers on the stock springs with two 1/8 inch Metacloack spring shims to both sides(1.75 inch total) to level the height of all 4 corners out.

Here is a better photo to see how level it is.

 

[RJT79]

35s and 2.5 inch lift

Sponsored