Search results

It’s on the body side of the connector for the fender connector for these lights. You can find the connector towards the back of the front fenders when you remove the inner fender. I initially repinned the connector so the white strip on my aftermarket lights were DRL, but by moving the PIN in...

@JL MADDOG No, the aftermarket lights like the ones I bought do not come wired for DRL, you would still need to wire it yourself. The aftermarket lights are only wired for turn signal, park lamps, and side marker. They do not have the DRL wire. Which is the same as the stock halogen wiring.

DRL function on the sport is only available by rewiring the fender harnesses. The DRL circuit is present on the body harness going to the fender connector but it is not present in the harness going to the halogen light assembly. You would need to wire that yourself and then use Jscan to activate...

@JL MADDOG DRLs are required in many countries so all Jeeps have options to program on DRLs otherwise they would limit the countries they can actually sell the Wrangler. A DRL is a forward facing white or orange marker light. Jeeps without the LED turn signal that includes the dedicated white...

Set DRL location to Canada. This just forces the Jeep to have DRLs always active as it’s a requirement here. If set to optional you can turn them on and off in the radio settings. If that still does not work there should be two settings in Jscan to tell the Jeep that Dedicated Left and Right...

I agree with Gregj. It sounds like your DRL settings are set to turn signal and not dedicated in the BCM. The DRL pin in the connector is the same on the Sport and Rubicon so repinning should not be required. I only did it because the lights I got did not have a DRL circuit at all. The stock...

I have not got around to the wiring to make the white strip work as DRL and parking lights together. I'll provide an update when I make that change. I did notice the other day that the new DRLs are not overly visible during the day. The turn signals are very bright. This may be that the new...

Thanks for the reply @Gregj. I was hoping there was a setting in Jscan I was missing that would turn them on with the headlights too. I will try to do some research about how a BCM reacts to back flow for connecting the leads from Pins 4 and 5 together, or into the diode option. I guess in the...

Hi all, I do not see this specific question answered on the forum so I am hoping someone can help. It looks like @Gregj really understands the DRL setup. I’ve installed after-market fender DRLs on my 2021 Sport S. These ones are specifically designed to fit the Sport fender and are plug and...