Sponsored

Search results

  1. Shaking after lifting at +70mph

    Hello, There are certainly a lot of threads about this stuff already so a good search would give you some things to consider. I had a similar issue though it was at a lower speed. A few things I checked and as far as I can tell I have solved the issue. If you had new trackbars installed or...
  2. Fuel and Oil Refresh mode in Progress Engine Running - STUCK!!!

    I would advise against just resetting the oil life (unless it was actually changed). When the FORM comes on try sniffing the oil on the dipstick - chances are it’ll smell like gasoline. The Jeep is doing this for a valid reason - to burn off fuel that has leaked by into the engine oil...
  3. Cold climate = no go

    I’ve been running my 4xe in Alberta, so far we’ve had a mild winter but still getting temps as low as 12F, over the next few weeks that will drop into the negatives. Battery range took a bit of a hit but I can still drive to work, plug in and then drive home and plug in again, so my daily...
  4. Fuel and Oil Refresh mode in Progress Engine Running - STUCK!!!

    You need to get the engine hotter. Run until the oil temp exceeds 98c until the Furl Oil Refresh Mode message goes away. I also live in Alberta and have had this same difficulty. You will struggle to reach that temperature just by driving on the highway. I am using the mopar winter front and...
  5. Light for the charging port

    I agree about there being a light on the charge port. I have to plug in … in the dark and was thinking it’d be great if there was a light that came on for a period of time after I open the charge port door. I wouldn’t want the light on all of the time, it’s not necessary and may attract...
  6. Fuel and oil refresh mode ?

    Hello, I recently experienced this and wrote about it on the 4xe forum. I got some good input from the guys over there about this. There are two causes for the FORM. Fuel refresh - if you have not fueled up for 90 days the fuel refresh mode will kick in and the ice will run. Adding 4ga of...
  7. Show Me Your 4xe on 37s

    Thanks MSparks909, The next day I removed the bumper tips - but I have not tried flexing again yet. I hope to get some time soon to do this again, I was thinking of wrapping some rags around a large rubber mallet to make a smooth rounded… press to use with a heat gun and try remoulding the...
  8. Show Me Your 4xe on 37s

    I have not noticed any difference or at least anything significant enough to make me question doing anything about my breaks. The keep stops quickly when I need it to. One advantage of the 4xe in this respect over a conventional Jeep would be that a fair amount of daily breaking would be...
  9. Prospective buyer asking: Anyone with more than 5K miles and no problems?

    I have over 12k km which is about 7500 miles. No issues so far, I did maybe half of that with stock equipment before getting the 2” mopar lift, a set of 37’s and a winch. Since then I’ve done some nice off roading, mountain climbs, river crossings, reasonable mud and hill climbs - I get a kick...
  10. Show Me Your 4xe on 37s

    Hello all, I recently got the mopar ‘2”’ lift and 37” BFG KO2’s installed on procomp 17x9 7069 series rims. I am posting these pictures to help others make a decision as I would have appreciated the same during my research phase. It is worth noting this is my first Jeep though I have...
  11. Help me Decide - Show me your blacked out aftermarket wheels

    Hello Jeepeto, I like what your set-up. I was wondering what tire and size you’re running. I ordered a set of provolone 7069’s last week and will be installing them on BFG KO2 37’s this Thursday. Curious to know if you’re on 37’sx12.5… I was unsure if the back spacing would cause them to...


Top