Search results

Thank you everyone for the help. We took the advice and just let it do it’s own thing. When we started her up this morning, it fixed itself! Thanks everyone!

Hi everyone, My family and I are currently on a two week road trip with our 2020 JLU Rubicon. Early this morning, some where in Indiana, we started to experience issues with the uConnect system. It started with issues with the WiFi. I tried a soft rest and also pulling the F97 fuse, based on...

I so wished I had known about this before I installed mine. A much easier and elegant solution than what I ended up doing.

UPDATE: I received my Grimm Offroad Winch Plate for use with the stock steel bumper on a JL jeep. I spent the weekend installing both the winch plate and the winch. On the Grimm Offroad winch plate. The winch plate is great. (see attached pic) Very easy to install and the instructions were...

I just purchased the Apex 12000 and am going to pair it with the Grimm Offroad Steel Bumper Winch Plate. I put in an order for the winch plate and am waiting for it to arrive. I'll come back and post on my experience once I get it all installed.

So the good news is we are talking about the same hole! The hole on the backbone roof bracket needs to have a bolt nut in it. The hole itself is threaded, but with out the nut, which is supposed to be embedded underneath, the M8 bolt will never tighten. The backbone roof bracket should have...

To confirm, are you talking about the mounting bracket shown in the attached picture? If so, if you were to flip the mounting bracket over, then you should see an M8 bolt nut embedded (glued) in the hole you thread the platform foot bolt thru. I would check to see if its still there. When I...

So its likely that the bolt nut fell from its embedded position. I am pretty sure Rhino Rack just glues it in. You have two options. First, remove the mounting bracket and re-glue the nut in place. If the nut isn't there or if there is something wrong with the nut itself, then you can easily...

To answer the question in order 1) From the way I read the Rhino Rack paperwork, its 145lb off-road for the full bar system. This came from the installation manual for the low profile feet. So I would assume that the 2 bar system has a lower payload limit. 2) If your primary goal is to mount...

I have a 2020 4dr Rubicon and decided to go with the Rhino backbone and pioneer rack system. I have both the low profile and the quick release feet. Overall, I am not happy with my purchase. First for the good aspects of the platform. There is no doubt about it, that the platform...

Not only does this look like the best solution I have seen, you could probably start selling this as a solution!

I bought a 2020 2.0T Rubicon 4 door in August of 2020 and its been flawless for us. That said, I did pay for a long extended warranty for peace of mind. I test drove both extensively, I didn't think there was that big of a difference either way. We ended up going with the 2.0T because the...

I am considering the same two lifts as you. I have read great things about the AEV lift, but its been a lot harder to find reviews on the ARB kit. I am leaning towards the AEV only because of the additional info on it and the fact that there is a local shop here that installs a ton of them and...

Hello everyone, New to the Jeep world, but bought a 2020 Wrangler Rubicon (JL, 4dr, 4cy). I need recommendations on suspension upgrades that doesn’t add any lift to the stock Rubicon, but that is designed to help with the additional load of my roof top tent (160lbs), cargo, and hitch mounted...