Search results

Shock relocation brackets 7620 Jeep 2021 jlur and Teraflex falcon shocks SP2 3.3. Seems that they don't want to play together shock length isn't long enough bottoms out before Bump Stop engages. Yes I know I can extend the bump stops but that would limit my UP travel would prefer not to. The...

I know how to get the weight now, I need the stock weight.

Anybody know what the front and back split is for a 2021 JLUR? I know how to get the weight now, need to know what it was stock so I can know how much I added to the rear. Stock is approx. 4450LB from what I can find. Of course that varys a bit depending on the build. I have done lots of mods...

2021 JLUR parking brake problem. I just replaced the rear pads and thought I might as well do the parking shoes at the same time. The parking brake hasn't been holding for awhile now, It would move a bit when in park and the park brake applied. Now I know it moved a bit till stopped by the park...

That means I have bit less than 2in lift

Is that to the axle or bottom spring mount?

in the front where the wheels steer. lol

All MC except for springs Teraflex shocks Falcon. Axle is centred just the person measuring isn't quite centred. The backspacing is to much so I found out, Dam AEV. Will live with it though, only time it rubs is when aired down and flexing the tire. What is your lift height and what type of...

As it turns out except for the backspacing all is good. See pic. What type of spring are you running, looks like progressive.

Vancouver Canada Just up the coast.

Do you know what the stock hight is? Wouldn't I get rubbing on one side more than the other if the axle isn't centered? The Deep backspacing I'm going to have to ask aev why so mu some times the simplest things get you. Why didn't I think to turn the tape around? ?

Is there a better way that I can measure axle centred? I'm thinking the antisway bar end links are rubbing the same on each side. If the axle wasn't centred wouldn't they rub more on one side?

I'm thinking the axle isn't centred, see pic. unless I'm doing something wrong.

I measured from the upper spring perch to the axle tube both sides, see pic. Also measured from the frame to the tire lug see pic, tire sit to high to get proper measurement from spring perch.

Wild peak AT 35 X 12.5 X 17 Borah DualSport for JL Wrangler & Gladiator MC 3.5 game changer lift

it is a teraflex spring.#1356000

The backspace is 5.72in and the offset is 25mm. Just had the alignment checked and all was ok I was told. Is there a way that I can check this myself?

Falcon 3.3

the reason of the duplicate thread the pic. didn't upload and it wouldn't let me add them after.

I can do that, just seemed not right to be putting the inside nut against the antisway bar. Thinking of galling.