Sponsored

Search results

  1. Mopar tailgate reinforcement and CB antenna mount

    I also use the 2m firestick antenna, but no spring. I have tuned to 1.4 in 144mhz and 1.6 in the 146mhz (these are the lower abd upper frequencies for Switzerland) with hardtop, 35” spare tire and all doors closed. A was in the 2ish range wirh factory antenna length. I’m tent to cut a bit more...
  2. Fender flare extensions?

    Bawarrion is doing some for non-Rubicon application: https://bawarrion.com/products/bawarrion-jl-fender-flares-38mm
  3. on board air

    I have my twin ARB under the passenger seat, installed with the ARB support. Just modified to push the installation forward so that the compressor is entirely under the passenger seat (and the rear plastic floor mat does not have to be cut shorter). The twin compressor is installed top-down and...
  4. 35" Options on stock Rubicon wheels?

    Yes it is, not the best choice in sand.
  5. 35" Options on stock Rubicon wheels?

    Or go for goodyear wrangler mtr in size 275/80R17
  6. Warn Zeon Platinum - Rope hard to pull out with the freespool

    Hi all I do have Warn Zeon Platinum and the rope is hard to pull out when the frees pool in engaged on the remote control. It does not get out smoothly like with my Warn XP. Any ideas where the issue can be? Thanks for your help Linus
  7. Mopar tailgate reinforcement and CB antenna mount

    Hi all, to improve GND I drilled a 5mm hole in the Mopar tailgate and installed a M4 bushing. Then routed a cable from that point to the chassis.


Top