I did it. I removed the trim and inner skin. There is a nut plate that is behind. It got bent when I was trying to remove the broken bolt with a bolt extractor that's how it "fell"
See images for clearer understanding.
I bent it back and bolted it on. Yippie!!
Well I have the iKamper XCover on the Rhino Rack Platform which doesn't really have a ton of space for me to install.. I installed the front first by removing the freedom panels and standing on the seats so I get closer to the bolts with a really long extension and my gun.
On the back I used a...
Thanks Cake,
I appreciate it but shops here don't really assist you much with Jeeps, they are better with Petrols and 7series. I tend to avoid local Jeep shops because they are more inclined to SELL you stuff they don't understand than assist you and educate you like the shops in USA.
I'd...
Thanks for that, I will look into purchasing both actually.
What about the rear toe? It seems very positive to one end due to the 2.5" lift, you reckon the bracket will correct it? What about the front toe? Does front toe matter a lot? What does toe correction actually help with?
That's actually what I suspected as well. Teraflex Adjustable arms had the arms recommend at 24 1//4" but the non-adjustable at 24 5/8".
Will changing the lowers only fix this or do I need the uppers as well? Should I just go for a bracket?
Not sure what stock is but 24 5/8" is the...
Hi all,
Below is my Alignment Report and I believe the man said that my Caster is out but did not say what mod I need.
I have a 2020 RHD JLUR on 35" BFGKO2 with 2.5" Teraflex Spacer Kit with Front Lower Control Arms.
What do I need to bring everything to stock alignment? I believe I also need...
My fault was not the door being misaligned during installation.
My problem was the bolt for the Smittybilt breaking because there was no torque specs in the instructions.
Hi all,
When installing my smittybilt steps, I overtorqued and broke one of the bolts. The nut plate? Inside has fallen and I'm unable to retrieve the broken bolt, now the door is misaligned. Any way to retrieve the nut plate easily?
Please help T.T