I had the recall done a couple weeks ago and they replaced the clutch, pressure plate and throughout bearing, it is so much better than before. The pickup point is lower and feels more positive than before.
I just installed the new unit and no JScan settings work I also tried them all. So I installed the Dual ATC I already owned and that works fine in my 2020 JLU Willys. So I guess I wasted $250 unless I can somehow return it.
Regear it, I regeared my Willys when it was stock to 4:56 and it really woke it up but putting the 35’s on it neutered it a little. If I were to do it again I would go to 4:88 with the 35’s. In my experience most cold air intakes cause you to loose not gain.
So I initially installed this camera from Amazon https://www.amazon.com/gp/product/B08VVV4T3V/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and it worked great, but I didn't like the way it stuck out of the grill. I used the following pins yellow 21, black 22 to hook it into my 8.4 radio and...
Here is what I paid for the parts from MCKinney Jeep in Texas and I used the JSCAN app to enable it. It appears that the prices have gone up since last year but still beter than paying $429. https://mckinney.moparestores.com/accessories/2020-jeep-wrangler_jl_4_door/
P/N
Quantity
Price EA...
If you want full width I went with EAG Full Width Front Bumper with Fog Light Hole and Winch Plate Fit for 2018-2021 Wrangler JL
https://www.amazon.com/gp/product/B084F6TKTR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Here is an article, it is from Australia so the not legal part does not apply. Many people on here run spacers but I would not trust them. If you want a wider stance then get wheels with the proper offset to get the desired look. I equate it to doing a $150 spacer lift on your $40-60K Jeep or...
This article should help explain offset. You don’t offset the tires offset is the metric equivalent of backspace of your wheels. If you want to keep the factory wheels you can’t change the offset without spacers...
I had similar issues with the Auto Climate stack while using heat, it seemed fine in the summer when it was hot A/C worked fine. After it cooled off and I used the heat it was either too hot or too cold. I bought the extra temperature sensors but could not find where they should have been installed.
You have to flash it back to single manual control, I was able to go back to the original Manual control but had to use JSCan to set it back to Single MTC.
I had my 2020 Willys JLU re-geared to 4.56 and it is much better. I have torque when I need it and I can finally use 5th and 6th gear. I plan on going to 35’s after my lift is installed I hope I don’t loose my new found drivability.
I disconnected the ground wires for both batteries, then made sure to use 6th gear on the way home and my issue is fixed now. No more ESS light, also my backup camera and reverse lights work again.