Sponsored

Search results

  1. Soundbar Speaker Replacement with Alpine Premium

    There’s a direct plug and play for the speakers and I had an amp plug as well - but I didn’t use it - I don’t have the alpine amp- DS18 states - Included are plug and play options for your speakers that integrate into your factory wiring and amplifier or you can use an external amplifier for...
  2. Soundbar Speaker Replacement with Alpine Premium

    Went with the DS18 JLSBAR22LOADED. I had to connect and install the speakers myself, the sound bar is a direct replacement and the connection is plug and play, and I had to run the RGB wire to the battery and another wire to the 12v cigarette lighter (pink and yellow wire) - overall 3 hours of...
  3. New insane audio jl4001

    Through the front port on the dash just right of the stereo - it’s barely noticeable and the signal reception is great.
  4. New insane audio jl4001

    They still charge the phone but it won’t interact with the receiver and the only reason you would really need to is to connect to carplay - there’s a separate carplay cable that insane audio instructs you to wire through the glove compartment - in settings, there’s a future wireless capability...
  5. New insane audio jl4001

    Thanks everyone for the rear camera advice- plugged the yellow RCA into the rear rock cam and now everything works and every feature seems like it’s working without any issues.
  6. Hellwig 7775 Sway Bar Installation

    Yah, I don’t see it on eBay but found it in stock at : https://www.jegs.com/i/Hellwig/207/7775/10002/-1 I would call first looks like supply chain issue
  7. Hellwig 7775 Sway Bar Installation

    I’ve had it for 2 years - no complaints at all, minor off roading , mostly trails and highways
  8. Upgrading from the 5" UConnect3 to 7" UConnect4?

    the wires and pins are the same used on a Jk model, everywhere else was sold out - but Tasca had them, the 4 wires were a bit expensive, and one side has the connections, the other side didn’t , so you have to order the connecting pins, Mouser use to have them, but we’re out of stock when I was...
  9. Upgrading from the 5" UConnect3 to 7" UConnect4?

    After a year, I finally Installed both sensors - wires plugs, sensors, ordered from Tasca and Mouser , not hard just tedious, all together I installed the 7 inch radio, antenna, climate control with volume knob, sun sensor, temp sensor, and used Tazer Mini to make it all work
  10. Installation of the Kicker HS8 Hideaway Subwoofer

    So the rear seat does not fold down with the hideaway under the seat, but it’s ease of access with the quick disconnect makes it easy to take out when you need the seats folded down. I’ve needed my seats folded down twice and easily popped it out and stored it, then pop it back in after my...
  11. Installation of the Kicker HS8 Hideaway Subwoofer

    Recommend running the cable with power source, into center stack and near the driver’s, foot well, for ease of access.
  12. Upgrading from the 5" UConnect3 to 7" UConnect4?

    Its been awhile since I did I this, I bought the XM cable, cut the connector to fit the only unused connector in back of the radio, I didn’t run it up the pillar and left it dangle in the dash, I was lucky... but I figured that was the connector for the compass and it worked and still works...
  13. Installation of the Kicker HS8 Hideaway Subwoofer

    You have me interested, what did you pay for it?
  14. Installation of the Kicker HS8 Hideaway Subwoofer

    Please let us know how it goes and what your final outcome is, very interested.
  15. Installation of the Kicker HS8 Hideaway Subwoofer

    Sounds like a tougher job, probably less effective bass and acoustic, might be an overheat issue since there will be virtually no air circulation , I imagine you would have to determine how you are going to route the red power wire to the engine compartment , the front 12v, speaker wire to the...
  16. Installation of the Kicker HS8 Hideaway Subwoofer

    Also, no issues with weathering, no troubles at all and I did this back in May.
  17. Installation of the Kicker HS8 Hideaway Subwoofer

    No grommet, I thought it was too tedious and after examining our Jeep, you can gain access to the engine compartment just below the right side pillar interior and right side fender with ease. I connected the red wire with a hangar and slid it through that small opening , carefully, so I wouldn’t...
  18. Installation of the Kicker HS8 Hideaway Subwoofer

    I’ll go out tomorrow morning, I remember using a hanger and pushing between the foam and the inside panel, it popped through very easy, let me confirm and maybe take some pics
  19. Installation of the Kicker HS8 Hideaway Subwoofer

    I tried mounting it under the front passenger seat and I just couldn’t get it to work, so I found it easier to put it under the rear right passenger, good luck and let us know how it worked out.
  20. Upgrading from the 5" UConnect3 to 7" UConnect4?

    Replace all speakers. Add a low profile subwoofer, I did a DIY, type in kicker hideaway 8 to see it. You’ll add decent base for about $250 and after you install it, it’s plug and play and inconspicuous under the passenger seat


Top