Search results

The replacement part comes with the cable attached which is clipped to the seat back. The two holes at the center of this image actually hold this bracket in place if you don't want to replace the cable as well.

So unfortunately they never found the remainder of the kit so I can't confirm. It looked like it was going to be an under bumper rack. It's since been discontinued.

These are photos of the barricade hd 2 door roof rack parts. It's hard to verify if the top would open without the a or c pillar mounts. If you attempt to order it you will want to make a note that it is likely a two box kit...

called extreme terrain and they sold me a barricade which is almost identical to the smittybilt. If they had sent me all the parts I'd show the differences but the only sent the straight sections. Which hint that the 4 door indeed could be cut to suit the 2 door.

Called extreme terrain. Waiting to see if barricade J134250-JL is a proper roof rack

A tie rod removal tool aka pickle fork will also work

You can buy rattle cans of it two part code PPT https://smile.amazon.com/dp/B07YWSDS1R/ref=cm_sw_r_cp_apa_glt_fabc_WFK6JAQG89CH7KCANP1J

Non S sports will need a different windshield wiring harness Part number 68397121AC-001

No the non s doesn't have the wire connectors for adding home link but you can purchase them from the dealership.

They made it so that a cam operated latch release allows the seat to fold back at the last position your seat was set at. But otherwise remains locked forward. So you don't need to crush your passenger to put the seat back with a stationary can and you don't need a separate lever to release the...

A 2020 I ordered a few replacements from tasca parts but I will drop the Jeep off to get it replaced under warranty.

Another one broke for me on the driver's side. It's annoying that such little plastic piece could leave you stranded.

Glad they went with the boring jk islander graphics so my wife's jeep is still unique

The camera picks up the pearl of the paint way better than your eye. Jeep faked it pretty well in the old build n price tool. Now they show this

Do you have pictures of the airbag area on the side of the seats? We went wet okele and it loves to splay open

Looking to replace the drivers side arm. For a 2 door soft top. Mopar currently only offers it as part of assembly 68395065aa. It's pressed onto the keyed shaft and bolted to the linkage with 4 torx socket bolts and then you need to pop the retainer clip off the sunrider position damper.

Our 80ish pound golden Shepard lab likes the back seat. we have side steps which he uses. he got stuck under the steering wheel once so now he only hops in on the passenger side.

The rear quarter wast too high for stripes on the back. And the hood decal didn't look quite as good on the cowl part of the hood.

Sounds like a jeep nitro/liberty with solid axles

With the soft top we have a ton of space overhead anyone use that space for a powered sub?