I never turn down a brew...yes the bracket could be mirrored and work. The drivers side has an easier option to go through the firewall. However, you will need to extend the battery and the auxiliary wires to work, but it will definitely work.
What recommendations do you have on the best, deepest sound for aftermarket dual exhaust systems? I am old school with the deep throaty sounds, what are the recommendations? Looking for a full cat back system
One more thing Paul, I would have to go back and remember what color I connected, but I have a JL so the auxiliary switches were already wired all I needed to do was to connect the ARB auxiliary wire to the factory wiring for auxiliary switches
Paul,
No issues with air time (extra 45-60 seconds wasn’t worth the extra dollars). Related to routing, I routed directly under the carpet (under the seat) to the side trim (at base of the door) then up to and through the firewall. I put a protective sleeve on the harness and forced it through...
Look at my post and see if this helps
https://www.jlwranglerforums.com/forum/threads/arb-single-compressor-install.53917/
I can share dimensions if interested
The floor mat actually protects this as designed. This brackets pushed the compressor as far forward as it can physically go and when the mat is installed it flips up slightly and completely protects the cap...the other thing is, I designed the bracket for the lip to return up but I didn’t make...
Yes single and it is protected from rear passengers kicking it. I spent a lot of hours with cardboard cutouts getting it just right. I posted in the main forum yesterday so there is a thread there.
I just posted a thread on this. I put mine under the passenger seat and fabricated my own bracket to attach it without drilling any holes in the Jeep. I was also able to use the existing factory wire routes so the install is crisp and clean. I have attached some photos. All I need to do now is...
Have you thought about an under seat mount? I just did that 2 weeks ago and liked the location for several reasons. Engine compartment was too hot and potential for salt or other road debris. Didn’t want it fully in view inside vehicle. Didn’t want to use up valuable storage in rear compartment...
Top is off
Doors are off
Lift kit is on
35” tires and 18” wheels on
New Carolina Metal Masters side mirror on...https://www.carolinametalmasters.com/collections/jeep-jl-parts/products/cmm-jl-side-mirrors-with-1-ball-mount-solution
Foot pegs on
Loving my Jeep!