Sponsored

Search results

  1. Junkyard Axle swap

    Artec lower frame brackets and I cut out the crossmember tie in and welded it up myself for the third link and made all the links out of DOM and johnny joints.
  2. Junkyard Axle swap

    borh No both axles are 8x6.5. i did change out the studs to both me metric
  3. Ohio JCR Half Doors

    JCR Half doors. Half doors are painted rustoleum truck bed black. extra hinges and door hardware. $900
  4. Ohio Rubicon 6 speed Transfer case

    Rubicon Transfer Case for the manual transmission. Case is in perfect working order 25000 miles. $1600
  5. Hydro Assit

    unfortunately there was not any replacement parts available. I know redneck ram was looking into replacement seals. Some advice is let the internal assembly sit in a freezer overnight. this helps with the reassembly.
  6. Junkyard Axle swap

    This is the first time ever building an off road vehicle and I have done the gears, bearings, welded the trusses, DIY steering, tone rings, control arms, three link front and rear and now 14 inch coilovers. Lots of research take your time it will come together. Drives 90 mph down the highway and...
  7. Reverse lights and camera stop working after a while of driving

    Sorry I meant to say they work only about 15 to 20 minutes after the jeep is started not using the entire duration if I drive down the road for 45 minutes put the jeep in reverse to Park the lights and camera do not work if I restart the jeep the lights and camera immediately start working again
  8. Reverse lights and camera stop working after a while of driving

    Same issue reverse lights and camera work for about 15-20 minutes my reverse lights and camera quit
  9. Hydro Assit

    Thing just works. Drives 80mph down the highway to and from the trails. This was 300 mile one way trip 3 days on the trails and 300 miles back zero issues. I have been to Rush, Hollerwood, and wellsville with this setup and I believe it has helped tremendously. My power steering is cooler and...
  10. Hydro Assit

    Street driving is defiantly better on a bad road. You will notice it is a little slow compared to factory but that could possibly be improved by running the pump at a higher pressure. I will say adding hydro assist was a huge improvement overall.
  11. Hydro Assit

    About 3000 miles so far and it’s working as it should. It’s great on the trails. I am running a Dana 60 kingpin with 8 inch travel lock to lock with no issues. I am also running a Detroit locker which means my front wheels are locked majority of the time in the woods and I have no issue turning...
  12. Giveaway!!! KC all NEW Cyclone V2 LED 6-Light ROCK LIGHT KIT

    I’m in. Best and easiest lights to mount for sure.
  13. Junkyard Axle swap

    I am running sensors to the rear. Depends what axles you run for this. Control arms can be left in the factory positions or moved if you go with a long arm kit. I used artec trusses which keeps the ability to use factory mounting positions
  14. Hydro Assit

    mishimoto cooler and mounted it in front of the AC condenser
  15. Hydro Assit

    Yeah it’s pretty straight forward easy to clean up. Just be extremely careful reassembling the steering box.
  16. Hydro Assit

    I took the factory box apart. It is very easy. 7 bolts to open the steering box. I’ll post some pictures later. The trick is setting the parts in the freezer to aid in reassembly. Thanks to redneck ram for the advice.
  17. Hydro Assit

    Spent the weekend drilling tapping my steering box with success. Installed a 8inch ram and a power steering cooler for my junkyard Dana 60 kingpin. I have been driving with no stabilizer or front sway bar for the last 5000 miles and have had zero issues except for lack of power steering on the...


Top