Search results

Sweet thx! I am planning on buying the ST3 kit no shocks, and then the Falcon 3.3’s afterward just to split up the cost a bit.

Any need to replace driveshafts? I am debating between the 2.5” and the 3.5” myself. Thx!

I don't have one yet to look at the harness, but I am assuming your cutting just before the fuse and extending the harness from there?

Ran a couple easy trails today. Nothing crazy but it’s good to stretch the legs a bit.

Here is what I used. It’s pretty thick and I punctured it with scissors for the screw hole. VViViD 3M Clear Paint Protection Vinyl Film 4" Wide Choose Your Size Including Tools (4" x 25") https://www.amazon.com/dp/B01LZB7GMJ/ref=cm_sw_r_cp_apip_BJEGnA4S6YXus

Some random pics and the cherry red alien shade representing. Also you can see how the 3m clear bra is holding up in the door sill with the metal piece rubbing on it. No issues and that just wiped off. $10 on amazon to save your paint if you go doorless.

Video of them in action.

Got my Roam Offroad step sliders installed with some oznium 1w green LEDs. Followed the led wiring thread here on the forum to wire these up.

Few misc pics. Order a set of roam offroad slider steps and some green flush mounted LEDs for them. They should be in soon I hope. Also installed some GPCA quick release thumb screws for the hard top as well.

I went red with my sunshade.

Just ordered my sliders. Looking to order a set on Onzium LED bolts. It seems that the 2019 version is now all IP68 rated, even the 1w aluminum ones based on their site. Any preference on with or without lenses? I was leaning towards the 3w stainless, but it seems the 1w is more then bright...

Thanks!

Looking at the frame mounted rails/step. I was interested in seeing the instructions but it's not posted on their site. It seems that on the frame mounted ones your installing riv nuts in the frame for brackets, and then loosening the body bolts for additional brackets? 4 on each side, 3 on the...

I am just confused as to how it ended up in the crack. If you were traveling up from the red box across the picture how does the vehicle end up in the position it’s in. It’s at that point perpendicular to the path it was traveling. Very weird.

This is not a sanctioned event as far as I know, it’s just people all showing up. There is no sign up, sign in, even on trail rides with companies. I would assume You are on your own just like if you went 2 weeks from now. Hopefully everyone is ok and it all works out. Horrible to happen for sure.

Added some Baja Designs Squadron Pros. Also added a couple decals from pixel decals. Took a better shot of the rear window too. That’s from ThePaddockFactory on Etsy.

Decided to take the doors off as it’s going to be nice this week. That allowed me to install som 3M clear protection over the holes that the inner door hinge screws into. This way when I remove or reinstall the doors that metal bracket doesn’t scratch the door jam. Also got a chance to run my...

Some Boat style sliders would be the way to go if you didnt want to buy the rock slide engineering step slider. they are basically the same thing, minus the step.

buying a set of RSE Step Sliders myself soon. Yes they are expensive, but you get the best of both a slider and step.

glad i found this thread. I was getting ready to order a set of rockslide step sliders, and had looked at the evo bomber rockers and both require you to either loosen or remove those body bolts. I have done all the work on my jeeps, from lifts to cages, but I am leaning towards having 4WP...