Stock suspension from my 2019 2door Rubicon. Components have approx 8,000 miles. Includes: coil springs, shocks, upper and lower control arms, front & rear track bars, and front & rear sway bar links. All are in very good condition.
I also have the front driveshaft, OE spare tire carrier...
This was our setup for a month long overlanding trip that included the Idaho backcountry discovery route and the continental divide from north to south. it is for two people and a dog, so things get pretty tight.
I have replaced the seat with a homemade platform and a shelf for the dog and to...
Thanks. I made it out of baltic birch plywood with cutouts for the woofer to give a good flat surface for the platform and additional cutouts to lighten it up a bit. It worked well.
I used the four oem screw points in the rear as well as the front seat mounts to anchor it all down. I...
Here are some better photos showing the storage platform. The grey board is to both give me a flat surface and a means to anchor the platform to the rear seat mounts.
We camped on BLM land this time around, but the campground at Red Rock SP is very nice. Weāve camped there many times. Not a lot of amenities, but it has unusual rock formations that are great for exploring.
Unfortunately, Cal4Wheelās Panamint Valley Days was cancelled this year due to the extensive damage from the remnants of hurricane Hilary, so we spent a couple days wheeling around Red Rock State Park.
Of course the dog and cat had to come. First time for the cat. She was a real trooper...
I have to agree that the passenger side definitely impacts visibility, especially for the 2-door. Luckily, the Jeep has a pretty good backup camera, so backing out of a parking spot isnāt an act of blind faith. Lane changes also take a little extra care as you can imagine. The diverās side, on...
They are made by XPO Gear. https://xpogear.com/products/jl2doorgullwing
My first impression is that they are very well made. They are powder-coated aluminum. The powder coating looks to be very well done, much better than other equipment Iāve installed.
Here are a couple photos on the Wyoming Backcountry Discovery Route from a couple weeks ago.
Sometimes you need a little more room than the 2-door can provide.
Quadratic has one by Go Rhino that mounts in front of the A pillar.
You can find it at https://www.quadratec.com/p/go-rhino/exterior-jack-mount-jeep-wrangler-jl-gladiator-jt?gclid=Cj0KCQiAj4ecBhD3ARIsAM4Q_jFwl_3iY-TZl9mp-jIzW3ZuldpTn3O8b_qr_PP7qAhkEXtdpO1tGZsaAhyIEALw_wcB#&gid=1&pid=1.
If itās not too late to add my 2cents, I ran across the same problem on a long Jeep trip. Very frustrating when you are running with several other jeeps and things get quiet. Luckily I had a handheld radio too.
I initially hard wired my unit in as well. The problem with the MXT275 is that it...
@Probearded1 - same here. you can see a photo showing my rack in post #4 above. I try to keep the weight up top to a minimum, so it might be a little overkill!
This might be a little overkill for you but I took my ā19 JLR 2-door with my wife and dog on a two week overland trip around Utah, Wyoming, Montana and Idaho. We primarily were camping though we did hotel it a few nights.
I removed the rear seat and built a simple plywood base with raised...
Iāve been very happy with my LOD Destroyer Shorty bumper up front. It is well built and I have had no issues.
I have a Warn rear bumper with tire carrier for the rear. Though I like the tire carrier, I have found the bumper to be too big and heavy. I have also found that the quality is not...