Having the same problem with ORP disappearing. Just now got this procedure from dealer to reinstall ORP. Not a permanent fix, but will get it back.
Dealer has escalated a Star Case on this issue. As I understand it, He has send a copy of the code as flashed to my JLR and a copy, pulled from my...
Haven't noticed the noise you described. I may have to check further.
I have the front camera powered through one of the AUX switches. When on, there is a little noise on CB channel 4. Also, I installed a Backup Cam on my CJ7 last year and it has noise on CB channel 4 when powered up in reverse.
Really sorry to hear you had so much trouble. At least you are moving forward. Hopefully your experience will provide guidance to others.
I really love the options made possible by the Tazer. Here are some that I am using.
SS Kill
AP Kill
Turn Cam (needs screen caption "Objects are REALLY...
Sad to hear you are having so much trouble. Mine is a 2019 JLR. Done this several times and here is what works very well for me.
After removing the kick panel, I squeeze my 230# body in and lay on my right shoulder.
I place a small light to shine on the plugs.
Using my right hand, I place the...
Four 2019 Rubicon 17 x 7.5 OEM Wheels. $400. Great Shape, pulled after 500 miles. Never been off pavement. London Ky. Prefer local pickup, will ship lower 48 on your dime with prepayment. Without sensors.
Some nice installs.
FYI I found that TAY-148014 - Taylor Braided Ground Straps
are a perfect fit for grounding the Swing Gate to the Tub. They are "heavy duty" tinned copper and 14" long. Purchased from Summit Racing.
I don't have any pictures taken during install. After install, it is...
Installed AMAK "White" Rock Lights.
Made rotatable mounting brackets from 1 1/2" x 1/8" aluminum angle. Shorten the light wiring and added connectors. Used small rubber washers between the light and the mount for vibration isolation.
Drilled a 5/16" hold into the side of each body mount...
Had to widen the holes a little with a round file. Later when I removed the Skid Plate to install my front camera, the garage was a lot colder and I had to widen them a little more.
Sent the mount issue to Warn Customer Service and nothing but crickets.
I did the same as you, went back and...
I find these 3 basic tools to be most helpful when installing or removing the Tazer Bypass Module.
1st. Get a good small light. I glued a magnet to a small LED light and attached the light to the small metal bar under the dash and in front of the 2 wiring plugs to be removed or reinstalled...
You make an excellent point!
I am a prime example. 62 year old 3rd generation Jeep owner that has been driving them ever since I could reach the pedals. I have owned my JLR for less than three weeks. Was not aware of this electrical nightmare. Two days after purchase, I was installing my new...
What you describe would be a bad day. My post may have been misleading. The only cable I disconnect is the AUX Battery negative. In my career I worked with Standby Battery Systems that weighed over 3 tons. I am definitely concerned about battery fires. Have witnessed first hand what can happen...
If anyone gets any pushback from an uninformed service department concerning your AUX Battery Bypass, here is a reply that should be good to go.
"Have had intermittent trouble with both batteries being run down over night. Everything is working just fine ever since eliminating the AUX Battery...
I could completely remove all connections to the AUX Battery, and there would be nothing wrong with that. However to completely disconnect the AUX Battery, I would need to remove both N3 & N1 and ensure they were taped up securely. Just not tidy enough for this retired electrical engineer. With...