For those of you looking for RockBox trailers, please be warned. That trailer is over priced and if you use it like I have, it’ll fall apart like mine did.
Please take a look at my lengthy google review about the failures I’ve encountered with my rock box trailer.
Also, from what I...
I wasn’t aware that you guys had posted the rates. Anyhow, I wasn’t complaining. Just giving my opinion. I’m happy with the springs, the only thing I’m on the fence about is the arms. They are hard to crank down and when I do get them tight, the ball joint shifts so that it’s not straight. I’ve...
No worries! The suspension is great! I love that they are a tad bit stiffer. I ran another company’s suspension on my jk and it was extremely stiff. I wasn’t happy with it. The RK feels great. I might end up keeping the stock shocks until they start leaking.
I didn’t purchase the shocks. I purchased the Evo shock extensions and reused the factory Rubicon shocks.
I wanted to give the springs a fair comparison to stock. They are slightly stiffer than my stock springs, I would say they are 10-20% stiffer. I will be swapping into kings later in the...
Looking for some information on the bore hole I needn’t in order to clear the backup camera on a JLU Rubicon.
I am considering the KMC Machete Desert XD228 but need to know what size the bore hole needs to be.
I used a Diablo 2 1/4 inch hole saw bit with a center drill bit to keep it in place. It worked fantastic and was much easier than it sounds.
If you look closely at the area that needs to be cut, you’ll see some wording stamped on it. Below the wordind you’ll notice a diamond stamped into the...
Fantastic! Great responses!
On question number 6, you said it’ll require 3 pucks. Is that for the front or the rear?
Rear - Metal bracket plus 2 pucks or metal bracket plus 3 pucks?
Front - 3 rubber pucks?
I actually did the circle cut they recommend and it was very easy. Little bit of cutting oil and a new hole saw. I then painted it black to prevent rust. Looks like factory.
Fairly new to jeeps and have a few questions.
Recently installed a Rock Krawler Max Travel lift on my 19JLU Rubicon.
1. What size is the front lower control arm jam Nut?
2. What size is the rear upper control arm jam Nut?
3. What size is the front track bar jam Nut?
4. Can I run the rear...
They are the same with the exception that the center hole is larger for the JL wheel to accommodate the backup camera hole.
AEV is working on making the Borah with a larger hole since the JK version does not fit over the JL camera hole. The wheel fits all four corners no problem but the spare...
I was just informed that my Jeep has left Ohio and is sitting in a rail car in Chicago. It’s heading to Utah and should arrive at the ramp by 11/23. Then it’ll be loaded on a semi truck and driven to the dealership. It should be arriving in Idaho in about 10 days.
Jeep was ordered 9/20
Fully...