@Zreau I need to find a picture but the place I moved the light is just one of the other posts already existing.
I believe it even holds the wire that feeds the light. So I just move the mounting of the light to that one.
Wanted to share my install using the brackets I got off of the Shapeways store. Really happy how it turned out. Had to move the floor light to the left side of the battery and with no modifications my AEV jack stand still fits! Now if only the Blackvue battery lasted longer. lol
I guess I'm adding my "me too". 3.6L and Auto. Low RPM, lower speed, you hear it as you press the accelerator just enough. If you accelerate harder you don't hear it, less force on the engine/transmission is the key. Not really sure if it's coming from the engine or the transmission.
One of...
I just did this adjustment for my 37" tires with the Mopar reinforcement. Took the tire off, loosened all 4 bolts on the tailgate just slightly then used some boards to prop up the tailgate on both hinge and latch side. Then I pushed the wood under the door latch side to lift it a little...
Anyone who has received the update gone into the dealer mode to see the actual software version? Be curious to see if I got the update or I'm still waiting.
I have the same issue. This is my thread: https://www.jlwranglerforums.com/forum/threads/genesis-offroad-dual-battery-issue.39747/
Without the Genesis system stop/start keeps working, with the system about 6-7 times it will disable. Not tied to battery charge or anything, "probably" because...
Mine still works until the 7th or so stop/start cycle of the drive. Turn off and start the Jeep again resets that number. Does yours work longer than that?
The main issue for my tent the edges aren’t totally flat. The two straps to hold the PVC cover on are attached to the bottom side of the tent frame. The channel you slide one side of the PVC cover into would also be inaccessible, you couldn’t take the cover completely off as you can’t slide it...
I was going to write up a bigger post on how I mounted my CVT tent on my pioneer platform but here are the highlights....
I basically added/drilled 6 new bolts through the tent and support bar and used the Rhino Rack eye bolt kit to bolt into.
I first bought a piece of fiberboard so I could...
Do you have pictures of the Maximus-3 brackets and the Stealth Hi-Lift Jack mount? I was interested in that but told they can’t both be installed at one time.
On the rack itself I went with Maximus-3 as the brackets were shorter so it seemed the brackets could resist sideways forces better...
I second using 303. All the places the freedom panels touch and possibly rub against the other parts of the hard top or doors. The 303 is nice and slippery to not hear the pieces move around. I do have to treat the top when I start to hear the noises again.
I was trying to make a sleeping platform inside my Jeep so I wanted a very slim fridge. I got a Dometic Coolmatic CD 30.
Not really meant to be installed/removed frequently but pretty happy with the setup as the fridge is always installed and hardwired to my battery.
It is on the left so I...
Anyone with the Genesis Offroad dual battery kit have issues with the start/stop system? I have a 2018 on the latest Uconnect 8.4" software as far as I know.
Usually during normal driving after about 6 stop/starts I get an error that disables the start/stop system until I restart the JL. When...
I used most of the advice from this guy... actually mount the antenna in the same place with a CB antenna mounting bracket.
https://www.thelonejeeper.ca/Phone-Booster-Off-Road-4x4-Expedition-Remote-Wilderness-Jeep-JK.html
I purchased the same booster to help my signal as I travel but usually i...
Nice! I use it for carrier diversification when I travel when my main carrier has weak or no signal. I was able to "Purchase More Data" to change my plan to the promo since I was an existing customer.
I bought the Mopar ones as well. I also bought some door sill guard tape to protect the paint bits not covered. Can’t tell it’s there, I think others have used it to protect the leading edge of the door hinges that were getting chipped by road debris.
https://www.amazon.com/dp/B003EP52BU/
I did buy it direct last year, I guess they changed it. The concern with the E50 is the diameter, might be too skinny for the maglight mount. Not sure where you could find the E100, maybe some other stores online will resell it?