They ride about the same as the stock BFG when set at 25psi cold. I noticed some increased noise at low speeds after a recent 1000 mile road trip. I found some slight cupping on the fronts. I'm overdue for a rotation and an alignment which is likely the cause for the wear and noise.
Thank you. I wanted something subtle and the '41s fit the bill. Quadratec had offered them as buy 4 get 1 free around the holidays so I bought them for myself for Christmas.
I ran out of time to do it myself before my road trip so I dropped it off at a local shop this morning. I didn't take before and after measurements or pictures but took an after shot at about the same angle as an older picture.
Before:
After:
Ride feels about the same as stock.
We're headed to the Broken Bow/Hochatown area this weekend. We plan on hitting the forestry roads and trails in the Ouachita National Forest north of Hochatown and west of 259. This area is right next to our cabin and easily accessible. Any other suggestions?
Thank you for the detailed review and follow up information. It was just what I needed to get over the hump and place my order. The lift arrives tomorrow...my next challenge is finding time to install it. I also have a set of black Quadratec '41 wheels and 37" Milestar Pantagonia's on their way...
The product picture shows the bushings separate from the lower control arms and sway bar links. Are they shipped that way and if so, are special tools required to press in the bushings?