I used the KC bar mounts from my previous Gravity Pro 6's for the Flex Era 10". Seems to work pretty well and solid. Here's my setup with the amber backlight active and the combo beam lens cover installed.
Question. Which size of Lock Security nut do I need for the end mounts on my Flex bar? I just installed the 10" on my bumper, but would sleep easier at night with some kind of deterrent.
I just received my order of the 10" Flex Era Light bar yesterday and was curious if you were going to have a write up on the wiring instructions using the Mopar Aux switches instead of the included relay/wiring harness? I notice the power draw is pretty close to the 40 amp max of the Mopar...
The Maximus bracket is one of the better front plate mounts you can get to be in compliance. Tucked up out of the way, but as you can see still visible from the front. No reason for any anxiety of being pulled over. Been running this for 2+ years.... no issues with the law.
Just the other day I was browsing the Teraflex website and noticed they now have a stabilizer clamp to modify your existing EF 2.2 in both 1.5 and 1.625 tie rod sizes. For a few dollars more than doing it yourself, you can use a clamp designed for the swap. They also posted a YT video on the...
First, let me say I really dig the look of a awning mounted to a roof rack. But my situation and build came with some issues. I have a 2 Door w/Maximus 3 roof rack, but my short platform (54" in length) limits my options on awnings w/usable shade. 4' to 6'' lengths (not ideal in the Texas sun)...
I also have the Maximus 3 rack and used the included relocation bracket, reception was horrible. It was so terrible I considered cancelling my XM service. But I was curious if placing the antenna back in the original location (above the soundbar) would be any worse. Though not exactly back to...
I got the blinking rear locker light on my 2019 Rubicon a few weeks ago (right at 36K miles no less) took it to the dealer hoping they would honor the basic warranty and luckily they did. I have ARB diff covers installed by the way. But they replaced the whole rear axle not just the sensor. This...
I previously had the Bestop Sunrider installed (removed when I went with a roof rack) and no issues with wind or noise at highway speeds. Pleasure to own and use, I say go for it!
So happy with my Maximus-3 rack. The dual Roam 83L boxes fit nicely and free up needed storage inside the Jeep. Plans for the future include mounts for recovery boards and maybe a water storage system.
My 2019 Rubicon w/6spd. Took a trip down to South Padre recently and got the dreaded rear locker blinking sensor and to make it worse just hit 36K (out of warranty) but Mopar honored the issue and my dealer installed a brand new rear axle. Wonder if the issue is fixed or will it go again?...
Just finished installing both side ladders onto my Maximus-3 rack and thrilled with the results. I had small issue during installation/fitment of one of the ladders, reached out to customer service and Tyler came thru like a champ! Lots of compliments on the rack since installation.
I'm using an ATP (American Trail Products) winch plate. Very beefy at 1/4" thick and one solid piece. No brackets or bolts to piece together, all one unit.
Just installed my Maximus-3 2 Door roof rack system a few days ago and could not be happier with the results. Not gonna lie, little anxiety drilling into your fiberglass roof but just follow directions and triple check all your measurements and everything lines up beautifully. With the 2 doors...